Dispensing bottles are the squeeze-and-apply end of pack packaging: a straight-wall plastic bottle, a nozzle or spout closure, and a plug or pin so the end user can drive a bead, a drop or a line onto a joint without a brush or a syringe. CHMIB supplies the range blank, from 5 ml up to 500 ml, in four related bottle families for adhesives, instant glues, oils, lubricants, inks and pigments.

Quick answer
A dispensing bottle is a squeezable plastic bottle closed by a nozzle or spout cap, with a plug or pin that controls the point of use. CHMIB’s range covers four families: the CH-001 instant adhesive bottle (5–100 ml, colour-coded cone cap, optional steel pin), the CH-002 dispensing bottle (30–500 ml, cone nozzle with red tip plug), the CH-003 oil bottle (60–500 ml, tethered spout cap) and the CH-004 applicator bottle (30–500 ml, one-piece PP long-taper nozzle cap). All are supplied blank for OEM decoration.
The range at a glance
| Model | Volume range | Closure | Material | Best for |
|---|---|---|---|---|
| CH-001 Instant Adhesive Bottle | 5, 10, 20, 28, 50, 100 ml | Colour-coded cone nozzle cap, tamper-evident ring, optional internal steel pin | HDPE + PE | Instant and fast-setting adhesives, drops and small beads |
| CH-002 Dispensing Bottle | 30, 60, 100, 120, 180, 250, 500 ml | White cone nozzle cap with a removable red tip plug | HDPE + PE | Adhesives, sealants, oils, lubricants, inks and pigments |
| CH-003 Oil Bottle | 60, 100, 120, 180, 250, 500 ml | Screw cap with a long conical spout and a tethered plug | HDPE + PP | Oils, lubricants and workshop liquids opened and closed repeatedly |
| CH-004 Applicator Bottle | 30, 60, 100, 120, 180, 250, 500 ml | One-piece PP long-taper nozzle cap | HDPE + PP | Drops and thin lines, applicator-style dispensing |
| CH-005 Flip-Top Squeeze Bottle | 30, 60, 100, 120, 180, 250, 500 ml | PP butterfly flip-top cap | HDPE + PP | Squeeze-and-close packs, oils, lotions and thin liquids |
| CH-013 Instant Adhesive Bottle | 15, 20, 50 ml | Cone nozzle cap with loose overcap | HDPE + PE | Instant and fast-setting adhesives |
| CH-024 10 ml Glue Bottle | 10 ml | Translucent PE nozzle with white ribbed overcap | LDPE + PE | UV and anaerobic adhesives, small-drop dosing |
| CH-025 Flat Adhesive Bottle | 25, 50, 250 ml | Tapered overcap with optional tapered nozzle | LDPE + PE (25 ml); per project (50/250 ml) | Adhesives and pastes in a flat, stackable body |
| CH-028 Adhesive Squeeze Tube | 50, 250 ml | Pointed nozzle cap with clear collar, crimped-tail tube | LDPE + PE (50 ml); per project (250 ml) | Adhesives and sealants in a collapsible tube |
| CH-075 Slim Adhesive Bottle | 50, 250 ml | Long conical translucent PP nozzle, translucent collar, white or black overcap | LDPE + PP | UV-curing and anaerobic adhesives, reachable tip on a tall slim body |
| CH-109 Ink Bottle | 30 ml sample; 100, 240 ml | Translucent or black screwed collar with long conical tip, black cone overcap | PET + PP | Ink, hair lotion and serum samples where the fill has to be visible |
What makes a bottle a dispensing bottle
Three parts do the work. The body is a straight-wall squeeze bottle: pressure comes from the hand, and the wall recovers between strokes, so flow stops when you stop squeezing. The nozzle or spout narrows the opening down to a tip, which converts a squeeze into a line or a drop instead of a spill. The plug, pin or tethered cap closes that opening when the pack is not in use.
Bottles without a nozzle are simply containers. The closure is what turns the pack into an applicator, and it is also why these bottles are specified by the liquid being applied rather than by shelf appeal alone.
| Part | Function | What buyers usually specify |
|---|---|---|
| Body | Holds the liquid, generates squeeze pressure | Volume, resin, wall stiffness |
| Nozzle or spout cap | Narrows flow to a bead, drop or line | Tip opening, thread, colour |
| Plug, pin or tether | Closes the nozzle between uses; keeps the tip clear | Colour, whether it ships in place, whether it is tethered |
Where these bottles are used
Adhesives and sealants are the largest use: a bead along a joint, a line around a gasket face, a drop on a thread. Instant and fast-setting glues use the small CH-001 sizes with a steel-pin cap that keeps the nozzle clear. Oils and light lubricants come next, where the nozzle or spout lets a technician oil a bearing, hinge or chain without a spout. Inks, pigments and dyes use the same body for small-batch and sample filling.
The limit is viscosity and chemistry. A formulation that needs a barrier layer, or a solvent that attacks the resin, is the wrong liquid for this bottle whatever the closure can do. Compatibility and shelf life must be tested with your own formulation in a sample bottle before a production run.
OEM supply and what we need from you
We supply bottles, closures and plugs as components, or assembled for your line. Bottles ship blank as standard; label, silk screen and sleeve decoration, plus cap colour matching to your brand, are available as OEM work. No logo, badge or certification mark is printed on the standard bottle, and no food-contact or pharmaceutical claim is made for these bottles.
To quote, we need four things: the volume or volumes, the liquid being packed, whether you want the closure assembled or shipped loose, and your annual quantity. Minimum order quantity per size, sampling and production lead time, decoration minimums and mixed-size packing are quoted per project.
Send your dispensing bottle specification
Tell us the model or volume, the liquid, your assembly preference and annual quantity, and we reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.
FAQ
What is the difference between the four bottle families?
Size and closure. CH-001 is the small instant adhesive range, 5–100 ml, with colour-coded cone caps and an optional internal steel pin for drop-by-drop dosing. CH-002 is a 30–500 ml squeeze bottle with a wide cone nozzle and a loose red tip plug for beads, lines and oiling. CH-003 is a 60–500 ml oil bottle whose plug stays on a tether to the cap, for packs opened and closed repeatedly. CH-004 is a 30–500 ml applicator bottle closed by a one-piece PP long-taper nozzle cap that lays down a drop or a thin line.
Can I fill these bottles on an automatic line?
The neck opens straight down into the body, so standard filling nozzles fit without an adapter. Check your filler head against one physical sample before a production run.
Do you print the bottles?
Bottles and closures ship blank as standard. Label, silk screen and sleeve decoration are OEM work, and the cap can be colour-matched to your brand. The minimum order quantity per colour is quoted per project.
Can the same bottle hold a solvent-based product?
Only after a compatibility test. The body has no barrier layer, so aggressive solvents can permeate or stress the wall over time. Send us the formulation and your target shelf life, and test it in our sample bottle before ordering.
