CH-028 Adhesive Squeeze Tube — 50 / 250 ml with Pointed Nozzle Cap

CH-028 is a squeeze tube for adhesive in 50 and 250 ml, sealed with a crimped tail and closed by a translucent nozzle with a white pointed overcap. Tubes ship blank for OEM decoration.

SKU: CH-028 Category:

Description

CH-028 is a crimped-tail squeeze tube for adhesive in 50 and 250 ml, closed by a translucent pointed nozzle and a white overcap. The flexible body dispenses by hand squeeze and the sealed crimped tail keeps the content isolated; tubes ship blank for your own brand.

CH-028 adhesive squeeze tubes in red, one larger and one smaller, with white pointed caps and clear collars on a khaki background

Quick answer

CH-028 is a flexible adhesive squeeze tube in 50 and 250 ml with a pointed nozzle and a white overcap. Unlike a rigid bottle, the body flattens as the content is squeezed out and the tail is sealed by crimping. It is supplied blank for OEM decoration.

Pointed nozzle and sealed crimped tail

Two red CH-028 adhesive tubes lying side by side on a dark reflective surface, with white pointed caps
Single red CH-028 adhesive tube standing upright with a white pointed cap and clear collar, sealed crimped tail at the base
CH-028 red tube fitted with a translucent pointed nozzle and clear collar, white overcap standing beside it
CH-028 red tube with bare threaded neck, a translucent nozzle with clear collar and a white overcap laid beside it

The tube stands upright under its own flattened tail, with the white overcap and clear collar at the neck. The detail below shows the translucent pointed nozzle fitted to the red tube and the overcap standing beside it. The parts view lays out the bare neck, the nozzle with clear collar and the overcap separately.

The tail is a sealed crimp, not a screw base. The nozzle lifts off to expose the threaded neck; tubes can ship capped or loose, and the neck finish is confirmed on the approved drawing before sampling.

Two sizes, weights and packing

The catalog lists 50 ml and 250 ml lines. No size-chart drawing is listed for CH-028; confirm dimensions against a physical sample before tooling or artwork.

CH-028 sizes, weights and packing (per factory catalog)
Nominal volumeUnit net weight (g)MOQ (sets)Units per cartonCarton size (cm)Carton net weight (kg)
50 ml12.006006002# 60*42*497.20
250 ml27.001001002# 60*42*492.70

Material: 50 ml LDPE+PE; the 250 ml body material is quoted per project (per factory catalog). Nominal volume is the rated capacity; exact resin grade and neck finish are confirmed on the approved drawing before sampling.

No size-chart drawing is listed for CH-028; confirm dimensions against a physical sample before tooling or artwork.

Body colour range

CH-028 adhesive tubes in black, white and red, each with a white pointed cap and clear collar

The photographed range shows black, white and red tubes, each with a white pointed cap and clear collar. Other colours and brand-matched closures are OEM items, quoted per project with a minimum order quantity per colour.

Applications

  • Adhesives and sealants — squeeze-bead dispensing on joints and repairs
  • Thin pastes, greases and penetrating fluids in refill and kit packs
  • Craft, hobby and DIY compounds — small-batch squeeze packs
  • Sample, travel and trial-size packs for own-brand lines

Compatibility with a specific formulation must be confirmed by the buyer, because shelf life depends on the liquid, not only on the container. Test your own formulation in a sample container before a production run. The container is not marketed as food-contact, cosmetic-grade or pharmaceutical primary packaging, and no certification claim is made on the product itself.

CH-028 versus our rigid dispensing bottles

CH-028 is a squeeze tube, not a rigid bottle: the flexible body flattens as content is expelled and the tail is closed by crimping, whereas our dispensing bottle range keeps a fixed hard body and a screw-neck closure. Choose the tube where a flexible, flattening package and a sealed tail are preferred; choose a rigid bottle where a repeated screw-on closure and a standing cylindrical body are required.

OEM, decoration and documentation

Bottles and tubes are supplied blank. Label, silk screen and sleeve decoration, plus nozzle or cap colour matching to your brand, are OEM work. No logo, badge or certification mark is printed on the standard container.

Minimum order quantity per size is listed in the table above, counted in sets (one container with one closure). Lead time, decoration method, artwork requirements and colour minimums are quoted per project, because they depend on the size mix and the closure colour chosen.

Certification and material documents are available upon request. No certification mark is claimed on the product itself, and no food-contact or pharmaceutical claim is made for these containers.

Packing and shipping

Units per carton, carton size and carton net weight are listed in the table above. Containers can ship capped with the overcap closed, or bulk-packed with the closure loose for your own capping line. Inner liner, export packing, mixed-size and mixed-colour orders are confirmed at quotation.

Request a sample or a quotation

Send your target size or sizes, the liquid you are packing, the cap colour you need and your annual volume. We reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

Is CH-028 a bottle or a tube?

It is a flexible squeeze tube. The body flattens as the content is squeezed out and the tail is sealed by a crimp; it does not have a rigid standing bottle body or a screw base.

What sizes are listed in the catalog?

The factory catalog lists 50 ml and 250 ml lines for CH-028. The 50 ml material is LDPE+PE; the 250 ml body material is quoted per project.

What closure does CH-028 use?

A translucent pointed nozzle screws onto the threaded neck, with a white overcap protecting the tip. The closure can ship fitted or loose for your own capping line.

What is the minimum order quantity?

MOQ is 600 sets at 50 ml and 100 at 250 ml, counted as one tube with one closure. A first order may combine sizes above their individual minimums. Lead time is confirmed at quotation.

Can I put my own adhesive in this tube?

Adhesives, sealants and thin pastes are the usual categories. The tube is not a barrier layer, so long-term storage of aggressive solvents is not recommended. Compatibility must be tested with your own formulation in a sample tube.