CH-005 Flip-Top Squeeze Bottle — 30 ml to 500 ml HDPE with PP Butterfly Cap

CH-005 is a 30–500 ml blank HDPE squeeze bottle series with a one-piece PP flip-top butterfly cap in seven sizes. White and black caps are shown; bottles ship blank for OEM decoration.

SKU: CH-005 Category:

Description

CH-005 is a blank HDPE squeeze bottle range in seven sizes — 30, 60, 100, 120, 180, 250 and 500 ml — closed by a one-piece PP flip-top butterfly cap that lifts open for dispensing and presses shut between uses. The straight-wall cylinder with a short sloped shoulder is made for mild lotions, toners, craft liquids and refill packs that a finger-squeeze bottle handles comfortably. Bottles ship unprinted so you can decorate them for your own brand.

CH-005 HDPE squeeze bottles from 30 ml to 500 ml with white and black flip-top butterfly caps on a khaki background

Quick answer

CH-005 is a 30–500 ml blank HDPE squeeze bottle series with a PP flip-top butterfly cap in seven sizes. The cap hinges open to a round inner plug and sealing rim, and presses shut between uses. White and black caps are shown; bottles are supplied blank for OEM decoration.

Flip-top butterfly cap: open and shut by hand

CH-005 squeeze bottle with the flip-top cap closed next to the same bottle with the cap flipped open

The closure is a one-piece PP butterfly cap on a hinged lid. Lift the lid with a thumb or finger to expose the round inner plug and the dispensing opening; press it back down to close. The hinge, inner plug and sealing rim are visible in the close-up below.

Close-up of the white PP flip-top butterfly cap on a CH-005 HDPE bottle, showing the hinge, the inner plug and the sealing rim

The cap screws onto a threaded neck. Bottles can ship capped or loose; where a filler caps in-house, the same closure is supplied in bulk to the capping line, and the neck finish is confirmed on the approved drawing before sampling.

CH-005 bottle with the flip-top cap fitted, the same bottle with its threaded neck open, and a loose flip-top cap standing beside them

Seven sizes, shared closure

Seven CH-005 blank squeeze bottles of mixed sizes spread out, one lying on its side, white caps and one black cap

Every size takes the same flip-top cap family, so one filling line, one cap feeder and one spare-parts list cover the whole range instead of stocking a closure per size.

CH-005 sizes, weights and packing (per factory catalog)
Nominal volumeUnit net weight (g)MOQ (sets)Units per cartonCarton size (cm)Carton net weight (kg)
30 ml8.10100020002# 60*42*4916.20
60 ml12.40100010002# 60*42*4912.40
100 ml18.005005003# 53*46*409.00
120 ml18.905005004# 60*42*459.45
180 ml21.40297297S3# 53*46*37.56.36
250 ml23.40240240S3# 53*46*37.55.62
500 ml33.40108108S3# 53*46*37.53.61

Material: HDPE bottle + PP closure parts (per factory catalog). Nominal volume is the rated capacity; unit net weight per size is listed in the table above. Exact resin grade and neck finish are confirmed on the approved drawing before sampling.

Cap colours and grouped view

CH-005 bottles with a white cap and a black cap, a bottle lying on its side and a loose flip-top cap in front

The photographed range shows white and black flip-top caps only. Other colours and brand-matched caps are OEM items, quoted per project with a minimum order quantity per colour.

Applications

  • Toiletries and personal-care liquids — lotions, toners and cosmetic liquids in retail and refill packs
  • Household and mild cleaning liquids — refill bottles for mild cleaners and air-care liquids
  • Crafts, hobby and DIY liquids — small-batch paints, dyes and refill packs
  • Sample, travel and trial-size packs for own-brand refill lines

Compatibility with a specific formulation must be confirmed by the buyer, because shelf life depends on the liquid, not only on the bottle. Test your own formulation in a sample bottle before a production run. The bottle is not marketed as food-contact, cosmetic-grade or pharmaceutical primary packaging, and no certification claim is made on the product itself.

Where CH-005 sits next to CH-002, CH-003 and CH-004

All four are straight-wall HDPE squeeze bottles; the choice comes down to the closure and how the liquid leaves the bottle. CH-002 pairs the body with a wide cone nozzle and a loose red tip plug for glue, paste and thicker dispensing. CH-003 adds a tethered spout cap that stays attached to the cap, suited to a bottle opened dozens of times a day. CH-004 uses a one-piece long-taper PP nozzle for drops and thin lines. CH-005 keeps the body and adds a hand-lifted flip-top butterfly cap where quick open-and-close dispensing matters more than a fine nozzle.

OEM, decoration and documentation

Bottles are supplied blank. Label, silk screen and sleeve decoration, plus cap colour matching to your brand, are OEM work. No logo, badge or certification mark is printed on the standard bottle.

Minimum order quantity per size is listed in the table above, counted in sets (one bottle with one cap). Lead time, decoration method, artwork requirements and colour minimums are quoted per project, because they depend on the size mix and the cap colour chosen.

Certification and material documents are available upon request. No certification mark is claimed on the product itself, and no food-contact or pharmaceutical claim is made for these bottles.

Packing and shipping

Units per carton, carton size and carton net weight are listed in the table above. Bottles can ship capped with the flip-top closed, or bulk-packed with the closure loose for your own capping line. Inner liner, export packing, mixed-size and mixed-colour orders are confirmed at quotation.

Request a sample or a quotation

Send your target size or sizes, the liquid you are packing, the cap colour you need and your annual volume. We reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

What is a flip-top butterfly cap?

It is a hinged one-piece PP lid that lifts open to expose the inner plug and dispensing opening, and presses shut between uses. Unlike a screw cap or a nozzle plug, it opens and closes with one hand without twisting the whole closure off the neck.

Is CH-005 the same bottle as the CH-004 applicator range?

No. CH-004 carries a long-taper nozzle cap for drops and thin lines, while CH-005 carries a hand-lifted flip-top butterfly cap for quick open-and-close dispensing. The body style is related, but the closure and the dispensing method are different.

What cap colours are available?

The photographed range shows white and black only. Other colours and brand-matched caps are an OEM item; the minimum order quantity per colour is quoted per project.

What is the minimum order quantity?

MOQ is counted in sets, one bottle with one cap: 1000 sets at 30 and 60 ml, 500 at 100 and 120 ml, 297 at 180 ml, 240 at 250 ml and 108 at 500 ml. A first order may combine sizes above their individual minimums. Lead time is confirmed at quotation.

Can I put my own liquid in this bottle?

Toiletries, mild cleaners, craft liquids and refill packs are the usual categories. The HDPE body is not a barrier layer, so long-term storage of aggressive solvents is not recommended. Compatibility must be tested with your own formulation in a sample bottle.