描述
CH-003 is a blank HDPE + PP oil bottle range in six sizes — 60, 100, 120, 180, 250 and 500 ml — closed by a screw cap with a long conical spout and a plug that stays on a moulded tether. The plug cannot be dropped, lost behind a workbench or left on a counter, which is what separates this closure from a loose-tip nozzle. The body is a straight-wall squeeze bottle on a threaded neck, specified for oils, lubricants, inks and low-viscosity workshop liquids. Bottles ship unprinted for OEM decoration.

Tethered spout cap: the plug stays with the bottle

The cap is one moulded part: a ribbed screw skirt, a long conical spout that narrows the flow to a drop or a thin line, and a plug joined to the skirt by a strap. Opening the bottle means pulling the plug out of the spout; the plug then hangs from the tether instead of falling onto the floor. Closing it means pushing the plug back in with a thumb, one-handed, without looking for a loose cap.
That detail matters more than it sounds. A loose tip plug is the single part most often lost in a tool drawer, a tool bag or a workshop bench, and a bottle without its plug knocks over and leaks. The tether keeps bottle and closure as one unit for the whole service life.

Spout and plug are supplied assembled as standard. Where a packer prefers to cap in-house, the same closure is also available loose for the capping head.
Six sizes on one neck

Every size takes the same tethered spout cap, so one filling line, one capping head and one spare-parts list cover the entire range.
| Nominal volume | Unit net weight (g) | MOQ (sets) | Units per carton | Carton size (cm) | Carton net weight (kg) |
|---|---|---|---|---|---|
| 60 ml | 13.20 | 1000 | 1000 | 2# 60*42*49 | 13.20 |
| 100 ml | 16.70 | 700 | 700 | 2# 60*42*49 | 11.69 |
| 120 ml | 19.70 | 560 | 560 | 2# 60*42*49 | 11.03 |
| 180 ml | 22.20 | 297 | 297 | S3# 53*46*37.5 | 6.59 |
| 250 ml | 24.20 | 240 | 240 | S3# 53*46*37.5 | 5.81 |
| 500 ml | 34.20 | 108 | 100 | S3# 53*46*37.5 | 3.42 |
Neck: threaded, shared across all six sizes. Material: HDPE + PP (bottle and closure parts, per factory catalog). Nominal volume is the rated capacity; unit net weight per size is listed in the table above.
Applications
These images are concept renders built from our product photography. They show how the bottle is used, not a specific customer site.

The neck opens straight into the body, so a standard filling nozzle fits without an adapter, and the straight wall keeps the fill level visible on the line.

For oils, the long spout lays a thin thread exactly where it is needed, and the tethered plug closes the spout between uses.
- Oils and light fluids — counter and refill packs
- Lubricating oils and light greases — precision oiling of bearings, chains and tooling
- Inks, pigments and dyes — small-batch and sample filling
- Solvents, cleaners and conditioners — controlled wetting of a local area
- Workshop and maintenance kits — a bottle that keeps its own cap

Compatibility with a specific formulation must be confirmed by the buyer: shelf life depends on the liquid, not only on the bottle. The body has no barrier layer, so aggressive solvents are tested before a production order.
Where CH-003 sits next to CH-002

Both are squeeze bottles with a cone closure, so buyers often ask which one to specify. The difference is the closure, not the body: CH-002 uses a separate white cone nozzle and a loose red tip plug, sized 30-500 ml in seven steps. CH-003 uses a tethered spout cap in six steps from 60 ml, so bottle and plug stay one piece. Where a pack is opened and closed many times — a counter bottle, a technician’s oil bottle — the tether is the deciding feature. Where the plug is pulled once and discarded, CH-002 is the simpler specification.
OEM, decoration and documentation
Bottles are supplied blank. Label, silk screen and sleeve decoration, plus cap colour matching to your brand, are OEM work. No logo, badge or certification mark is printed on the standard bottle.
Minimum order quantity, sampling lead time, production lead time, decoration minimums and artwork requirements are quoted per project.
Certification and material documents: certification documents available upon request. No certification mark is claimed on the product itself, and no food-contact or pharmaceutical claim is made for these bottles.
Packing and shipping
Units per carton, carton size and carton net weight are listed in the table above. Bottles can ship capped with the tethered plug seated, or bulk-packed with the closure loose for your own capping line. Inner liner and export packing are confirmed at quotation; mixed-size orders are quoted per project.
Other models in the dispensing range
Related blank bottle families from CHMIB: CH-001 instant adhesive bottle (5–100 ml, colour-coded cone cap, optional internal steel pin), CH-002 dispensing bottle (30–500 ml, cone nozzle with red tip plug), CH-004 applicator bottle (30–500 ml, one-piece PP long-taper nozzle cap).
Request a sample or a quotation
Send the volume or volumes, the liquid you are packing, whether the cap should ship seated or loose, and your annual quantity. We reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com
FAQ
What is a tethered spout cap?
A screw cap whose tip plug is joined to the skirt by a moulded strap. Pull the plug out to dispense and it stays attached to the cap; push it back to close. Nothing is dropped and nothing gets lost.
How is CH-003 different from CH-002?
Both are necked squeeze bottles with a cone closure. CH-002 is 30-500 ml with a separate cone nozzle and a loose red tip plug; CH-003 is 60-500 ml with the plug tethered to the cap. Choose the tether when the bottle is opened and closed repeatedly.
Can the bottles be filled on an automatic line?
The neck opens straight into the body and takes a standard filling nozzle without an adapter. Check your filler head against one physical sample before a production run.
Is the bottle suitable for food oil?
The bottle is a standard HDPE+PP pack and is not marketed as food-contact certified. If the pack needs a food-contact declaration, raise it at quotation so the correct resin and documentation can be specified.
Can the cap be made in my brand colour?
Cap colour is an OEM item and depends on minimum quantity per colour, which is quoted per project. The standard colour is white.



