CH-075 Slim Adhesive Bottle — 50 and 250 ml LDPE Bottles, 200 to 275 mm

CH-075 is a blank tall slim LDPE bottle for UV-curing and anaerobic adhesives, 50 ml and 250 ml, with a long conical translucent nozzle and an 18 mm neck. OEM supply.

SKU: CH-075 Category:

Description

CH-075 is a tall, slim LDPE bottle for UV-curing and anaerobic adhesives, supplied in 50 ml and 250 ml. A 50 ml bottle stands 200 mm high on a 34 mm body; the 250 ml stands 275 mm on a 50 mm body, both measured with the nozzle and overcap fitted. Each set carries a translucent PP collar, a long conical translucent nozzle and a white or black PE overcap. Bottles ship blank and unprinted.

CH-075 slim adhesive bottles in 250 ml and 50 ml, red and white LDPE bodies with black and white nozzles, on a khaki background

Quick answer

CH-075 is a blank tall slim LDPE bottle for UV-curing and anaerobic adhesives, 50 ml and 250 ml, with a long conical translucent nozzle and an 18 mm neck bore. The 50 ml stands 200 mm high on a 34 mm body and the 250 ml 275 mm on a 50 mm body. MOQs are 1,200 sets and 600 sets; bodies ship blank in white and red.

A slim body for a reachable glue line

Most glue bottles are shaped around the volume. CH-075 is shaped around the reach: the body is a slim column with a flat front panel, so a 250 ml pack fits into a tool case or an applicator cradle and still puts the tip where the work is. The square-cut base carries an arched recess across the front and the bottle stands on it unaided, so it can be left on a bench between jobs instead of being laid down and rolled. Both sizes take the same nozzle family, which means one filling line and one spare-parts stock across the range.

CH-075 bottles in 250 ml and 50 ml lying on a dark surface, showing the square base, translucent collar and black and white nozzles

Long conical nozzle, translucent collar, overcap

The closure is three mouldings: a translucent PP collar that threads onto the neck, a translucent PP nozzle that tapers to a long conical tip, and a PE overcap that seals the tip in transit. The taper reaches past the joint face into a thread, a bore or a blind cavity, and the tip can be trimmed back for a wider bead. The collar is translucent so the filled product is visible at the shoulder, and the nozzle and overcap are moulded in white or in black to match the body. The neck measures 18 mm across the bore, which is the seat for this closure; other nozzle families are available on request.

CH-075 50 ml white bottle with the translucent conical nozzle exposed and the white overcap standing beside it
CH-075 parts: the white bottle with the neck bare, the translucent collar and nozzle, and the white overcap laid out separately

Dimensions, size by size

Heights are taken with the nozzle and the overcap fitted, because that is the height the pack occupies in a carton and on a shelf. Width is measured across the body, not across the base or the collar. The 18 mm neck bore is common to both sizes.

CH-075 dimension chart: 250 ml bottle 275 mm high and 50 mm wide, 50 ml bottle 200 mm high and 34 mm wide, 18 mm neck bore

CH-075 bottle dimensions and carton pack
VolumeOverall height (nozzle + overcap)Body widthNeck boreMaterialMOQ (sets)Sets per cartonCartonCarton net weightUnit weight
50 ml200 mm34 mm18 mmLDPE bottle, PP closure1,2001,2002# 60 × 42 × 49 cm22.80 kg19.00 g
250 ml275 mm50 mm18 mmLDPE bottle, PP closure6006002# 60 × 42 × 49 cm18.30 kg30.50 g

Both sizes pack into the same 2# carton at 60 × 42 × 49 cm, so a mixed pallet of the two volumes can be built on one footprint. Body depth is not fixed in the catalogue; the drawing that comes with your sample states it for the volume you order. Lead times, print minimums and mixed-volume shipments are quoted per project.

Body colours and closure options

Bodies are moulded in white and red from stock. The closure follows either colourway: a translucent collar with a white nozzle and overcap, or a black collar and black nozzle as shown on the 250 ml bottle. Custom body colours, colour-matched closures and printed bodies are OEM items with a minimum quantity per colour, and the print itself is your artwork.

CH-075 white 50 ml bottle standing with the nozzle fitted beside a red 250 ml bottle lying on its side with the neck open
CH-075 assembly states: a red bottle with the neck open, a white bottle with the collar and nozzle fitted, and the loose overcap and nozzle

Applications

The long taper puts the adhesive into the joint rather than around it, and the slim body keeps the tip steady over a vertical or overhead seam:

  • UV-curing adhesives, encapsulants and potting resins
  • Anaerobic threadlockers, retainers and flange sealants
  • Field service kits and repair cases that carry one bottle per compound
  • Optical, electronics and instrumentation assembly
  • Buyer-filled maintenance compounds, gels and sealants

The LDPE body carries no barrier layer, so solvent-based or aggressive formulations should be compatibility-tested before a production run.

How CH-075 compares with CH-025 and CH-028

All three take the same class of UV and anaerobic adhesive. CH-025 is the flat rigid bottle from 25 ml to 250 ml, built around a label face; CH-028 is the collapsible tube that empties and travels flat; CH-075 is the slim tall bottle, where the reach of the tip and a standing pack matter more than the label area.

UV and anaerobic adhesive pack comparison
CH-025CH-028CH-075
Volume25, 50, 250 ml50, 250 ml50, 250 ml
BodyFlat rectangular rigid bottle, six coloursCollapsible tube, black, white or redSlim tall LDPE bottle, 200–275 mm overall, white or red
ClosureStepped nozzle, translucent or black collar, white overcapLong conical translucent nozzle, translucent collar, white or black overcapLong conical translucent nozzle, translucent collar, white or black nozzle and overcap
Chosen whenOne label face and a rigid bottle up to 250 ml are neededThe pack has to empty fully and travel without air suck-backReach and a pack that stands in a tool case matter more than label area

Specification pages: CH-025 · CH-028 · adhesive bottle and tube range

OEM, decoration and documentation

Bottles ship blank and unprinted. The two stock body colours can be run together in one order, and a custom body colour, a printed body or a colour-matched closure is an OEM item. Label, silk screen, offset print and sleeve decoration are your artwork; the bottle carries no logo or certification mark as supplied.

Minimum quantity per colour, print minimums and sampling lead time are quoted per project. Certification documents are available upon request; the bottle is not marketed as food-contact, cosmetic or pharmaceutical primary packaging.

Packing and shipping

Sets ship assembled with the overcap on the nozzle, or flat-packed with the collar, nozzle and overcap loose for your own filling and capping line. Both volumes fill a 2# carton at 60 × 42 × 49 cm: 1,200 bottles of 50 ml at 22.80 kg net, or 600 bottles of 250 ml at 18.30 kg net. Mixed volumes and mixed colours can be combined in one shipment; the split is confirmed at quotation.

Request a sample or a quotation

Send the volume, the body colour, whether you want the nozzle assembled, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

What are the dimensions of the 50 ml and 250 ml bottles?

The 50 ml bottle is 200 mm high and 34 mm wide; the 250 ml is 275 mm high and 50 mm wide. Both heights include the nozzle and overcap, and width is measured across the body. The neck bore is 18 mm on both sizes.

What are the minimum order quantities?

1,200 sets for the 50 ml bottle and 600 sets for the 250 ml bottle. Both minimums match a full 2# carton at 60 × 42 × 49 cm: 1,200 bottles of 50 ml at 22.80 kg net, or 600 bottles of 250 ml at 18.30 kg net.

What is the nozzle made of, and is it a needle?

It is a translucent PP moulding with a long conical tip, not a steel needle. It seats on the 18 mm neck through a translucent threaded collar and is covered by a PE overcap in white or black. The tip can be trimmed back for a wider bead.

Which body and closure colours are available?

White and red are the stock body colours. The closure is supplied as a translucent collar with a white nozzle and overcap, or as a black collar and black nozzle. A custom body colour, a colour-matched closure or a printed body is an OEM item with a minimum quantity per colour, quoted per project.

How is CH-075 different from CH-025 and CH-028?

CH-025 is the flat rigid bottle from 25 ml to 250 ml built around a label face. CH-028 is the collapsible tube in 50 and 250 ml that empties fully and travels flat. CH-075 is the slim tall bottle in the same two volumes, 200 to 275 mm overall, chosen when the reach of the tip and a pack that stands unaided matter more than label area.