CH-024 10 ml Glue Bottle — LDPE Body with PE Nozzle and White Overcap

CH-024 is a 10 ml blank LDPE glue bottle for UV and anaerobic adhesives, fitted with a translucent PE nozzle and a white ribbed overcap. Bottles ship blank for OEM decoration.

SKU: CH-024 Category:

Description

CH-024 is a 10 ml blank LDPE glue bottle for UV and anaerobic adhesives, closed by a translucent PE nozzle and a white ribbed overcap. The small oval body suits precision gluing and spot dispensing; bottles ship unprinted so you can decorate them for your own brand.

CH-024 10 ml glue bottle in black and red, one with a white overcap fitted and one with a translucent nozzle, on a khaki background

Quick answer

CH-024 is a 10 ml blank LDPE glue bottle with a PE nozzle and a white overcap. The nozzle screws onto a threaded neck and the overcap protects the tip between uses. It is supplied blank for OEM decoration.

Nozzle and overcap for a controlled bead

CH-024 black 10 ml glue bottle with a translucent PE nozzle fitted and the white overcap standing beside it
CH-024 glue bottle components: a red bottle with its overcap, a black bottle lying on its side, a translucent nozzle and a white overcap
Macro of the CH-024 white overcap held against the translucent nozzle, showing the nozzle flange, the stepped tip and the ribbed cap wall

The translucent PE nozzle feeds a narrow bead from the small body, and the white ribbed overcap screws down over the tip to keep it clean and sealed between uses. The flange, stepped tip and ribbed cap wall are visible in the macro below.

The nozzle lifts off to expose the threaded neck. Bottles can ship capped or loose; where a filler caps in-house, the closure is supplied in bulk and the neck finish is confirmed on the approved drawing before sampling.

10 ml size, weight and packing

CH-024 10 ml glue bottle size chart: overcap 42 mm high with a 19 mm base and a 9 mm top, PE nozzle 36 mm high with a 9 mm base

The factory catalog lists a single 10 ml line. The drawing below records the overcap and nozzle dimensions; the body diameter is not marked on it.

CH-024 sizes, weights and packing (per factory catalog)
Nominal volumeUnit net weight (g)MOQ (sets)Units per cartonCarton size (cm)Carton net weight (kg)
10 ml6.47100020002# 60*42*4912.94

Material: LDPE body + PE nozzle and closure parts (per factory catalog). Nominal volume is the rated capacity; exact resin grade and neck finish are confirmed on the approved drawing before sampling.

Drawing dimensions: white overcap 42 mm high, base dia 19 mm, top dia 9 mm; PE nozzle 36 mm high, base dia 9 mm. The body diameter is not marked on the drawing.

Group view and body colours

CH-024 glue bottle with the overcap fitted, a second bottle lying down with the nozzle exposed, and a spare white overcap

The photographed range shows black and red bodies with the white overcap and translucent nozzle. Other colours and brand-matched closures are OEM items, quoted per project with a minimum order quantity per colour.

Applications

  • Instant, UV and anaerobic adhesives — drops or beads on joints and parts
  • Thin oils and light lubricants — precision oiling of small bearings, hinges and tools
  • Inks, pigments and dyes — small-batch and sample filling
  • Craft, model, repair and retail kits — single-project packs

Compatibility with a specific formulation must be confirmed by the buyer, because shelf life depends on the liquid, not only on the container. Test your own formulation in a sample container before a production run. The container is not marketed as food-contact, cosmetic-grade or pharmaceutical primary packaging, and no certification claim is made on the product itself.

Where CH-024 sits next to CH-001 and CH-013

All three are small adhesive bottles for precision dispensing. CH-001 runs a wider six-size range on a straight-wall translucent body with colour-coded cone caps and an optional internal steel pin. CH-013 uses an oval fan-shaped body and a long tapered nozzle cap for cyanoacrylate and thin beads. CH-024 is the compact 10 ml LDPE line with a short PE nozzle and a ribbed white overcap for spot gluing.

OEM, decoration and documentation

Bottles and tubes are supplied blank. Label, silk screen and sleeve decoration, plus nozzle or cap colour matching to your brand, are OEM work. No logo, badge or certification mark is printed on the standard container.

Minimum order quantity per size is listed in the table above, counted in sets (one container with one closure). Lead time, decoration method, artwork requirements and colour minimums are quoted per project, because they depend on the size mix and the closure colour chosen.

Certification and material documents are available upon request. No certification mark is claimed on the product itself, and no food-contact or pharmaceutical claim is made for these containers.

Packing and shipping

Units per carton, carton size and carton net weight are listed in the table above. Containers can ship capped with the overcap closed, or bulk-packed with the closure loose for your own capping line. Inner liner, export packing, mixed-size and mixed-colour orders are confirmed at quotation.

Request a sample or a quotation

Send your target size or sizes, the liquid you are packing, the cap colour you need and your annual volume. We reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

What closure does CH-024 use?

A translucent PE nozzle screws onto the threaded neck, and a white ribbed overcap protects the tip between uses. The closure can ship fitted or loose for your own capping line.

What sizes are listed in the catalog?

The factory catalog lists the 10 ml LDPE+PE+PE line only. Any other volume seen in a product photo is not confirmed in the catalog; ask our team whether another size can be quoted for your project.

What body colours are available?

The photographed range shows black and red only. Other body colours and brand-matched closures are an OEM item; the minimum order quantity per colour is quoted per project.

What is the minimum order quantity?

MOQ is 1000 sets for the 10 ml size, counted as one bottle with one closure. A first order may combine closures above the individual minimum. Lead time is confirmed at quotation.

Can I put my own adhesive in this bottle?

Instant, UV and anaerobic adhesives, thin oils and small-batch inks are the usual categories. The LDPE body is not a barrier layer, so long-term storage of aggressive solvents is not recommended. Compatibility must be tested with your own formulation in a sample bottle.