Dispensing Bottles — Blank Plastic Squeeze and Adhesive Bottles with Nozzle Caps

Dispensing bottles are the squeeze-and-apply end of pack packaging: a straight-wall plastic bottle, a nozzle or spout closure, and a plug or pin so the end user can drive a bead, a drop or a line onto a joint without a brush or a syringe. CHMIB supplies the range blank, from 5 ml up to 500 ml, in four related bottle families for adhesives, instant glues, oils, lubricants, inks and pigments.

Row of blank white dispensing and adhesive bottles with colour-coded nozzle caps on a warm khaki studio background

Quick answer

A dispensing bottle is a squeezable plastic bottle closed by a nozzle or spout cap, with a plug or pin that controls the point of use. CHMIB’s range covers four families: the CH-001 instant adhesive bottle (5–100 ml, colour-coded cone cap, optional steel pin), the CH-002 dispensing bottle (30–500 ml, cone nozzle with red tip plug), the CH-003 oil bottle (60–500 ml, tethered spout cap) and the CH-004 applicator bottle (30–500 ml, one-piece PP long-taper nozzle cap). All are supplied blank for OEM decoration.

The range at a glance

CHMIB blank dispensing and adhesive bottle families
ModelVolume rangeClosureMaterialBest for
CH-001 Instant Adhesive Bottle5, 10, 20, 28, 50, 100 mlColour-coded cone nozzle cap, tamper-evident ring, optional internal steel pinHDPE + PEInstant and fast-setting adhesives, drops and small beads
CH-002 Dispensing Bottle30, 60, 100, 120, 180, 250, 500 mlWhite cone nozzle cap with a removable red tip plugHDPE + PEAdhesives, sealants, oils, lubricants, inks and pigments
CH-003 Oil Bottle60, 100, 120, 180, 250, 500 mlScrew cap with a long conical spout and a tethered plugHDPE + PPOils, lubricants and workshop liquids opened and closed repeatedly
CH-004 Applicator Bottle30, 60, 100, 120, 180, 250, 500 mlOne-piece PP long-taper nozzle capHDPE + PPDrops and thin lines, applicator-style dispensing
CH-005 Flip-Top Squeeze Bottle30, 60, 100, 120, 180, 250, 500 mlPP butterfly flip-top capHDPE + PPSqueeze-and-close packs, oils, lotions and thin liquids
CH-013 Instant Adhesive Bottle15, 20, 50 mlCone nozzle cap with loose overcapHDPE + PEInstant and fast-setting adhesives
CH-024 10 ml Glue Bottle10 mlTranslucent PE nozzle with white ribbed overcapLDPE + PEUV and anaerobic adhesives, small-drop dosing
CH-025 Flat Adhesive Bottle25, 50, 250 mlTapered overcap with optional tapered nozzleLDPE + PE (25 ml); per project (50/250 ml)Adhesives and pastes in a flat, stackable body
CH-028 Adhesive Squeeze Tube50, 250 mlPointed nozzle cap with clear collar, crimped-tail tubeLDPE + PE (50 ml); per project (250 ml)Adhesives and sealants in a collapsible tube
CH-075 Slim Adhesive Bottle50, 250 mlLong conical translucent PP nozzle, translucent collar, white or black overcapLDPE + PPUV-curing and anaerobic adhesives, reachable tip on a tall slim body
CH-109 Ink Bottle30 ml sample; 100, 240 mlTranslucent or black screwed collar with long conical tip, black cone overcapPET + PPInk, hair lotion and serum samples where the fill has to be visible

What makes a bottle a dispensing bottle

Three parts do the work. The body is a straight-wall squeeze bottle: pressure comes from the hand, and the wall recovers between strokes, so flow stops when you stop squeezing. The nozzle or spout narrows the opening down to a tip, which converts a squeeze into a line or a drop instead of a spill. The plug, pin or tethered cap closes that opening when the pack is not in use.

Bottles without a nozzle are simply containers. The closure is what turns the pack into an applicator, and it is also why these bottles are specified by the liquid being applied rather than by shelf appeal alone.

Which part does what
PartFunctionWhat buyers usually specify
BodyHolds the liquid, generates squeeze pressureVolume, resin, wall stiffness
Nozzle or spout capNarrows flow to a bead, drop or lineTip opening, thread, colour
Plug, pin or tetherCloses the nozzle between uses; keeps the tip clearColour, whether it ships in place, whether it is tethered

Where these bottles are used

Adhesives and sealants are the largest use: a bead along a joint, a line around a gasket face, a drop on a thread. Instant and fast-setting glues use the small CH-001 sizes with a steel-pin cap that keeps the nozzle clear. Oils and light lubricants come next, where the nozzle or spout lets a technician oil a bearing, hinge or chain without a spout. Inks, pigments and dyes use the same body for small-batch and sample filling.

The limit is viscosity and chemistry. A formulation that needs a barrier layer, or a solvent that attacks the resin, is the wrong liquid for this bottle whatever the closure can do. Compatibility and shelf life must be tested with your own formulation in a sample bottle before a production run.

OEM supply and what we need from you

We supply bottles, closures and plugs as components, or assembled for your line. Bottles ship blank as standard; label, silk screen and sleeve decoration, plus cap colour matching to your brand, are available as OEM work. No logo, badge or certification mark is printed on the standard bottle, and no food-contact or pharmaceutical claim is made for these bottles.

To quote, we need four things: the volume or volumes, the liquid being packed, whether you want the closure assembled or shipped loose, and your annual quantity. Minimum order quantity per size, sampling and production lead time, decoration minimums and mixed-size packing are quoted per project.

Send your dispensing bottle specification

Tell us the model or volume, the liquid, your assembly preference and annual quantity, and we reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

What is the difference between the four bottle families?

Size and closure. CH-001 is the small instant adhesive range, 5–100 ml, with colour-coded cone caps and an optional internal steel pin for drop-by-drop dosing. CH-002 is a 30–500 ml squeeze bottle with a wide cone nozzle and a loose red tip plug for beads, lines and oiling. CH-003 is a 60–500 ml oil bottle whose plug stays on a tether to the cap, for packs opened and closed repeatedly. CH-004 is a 30–500 ml applicator bottle closed by a one-piece PP long-taper nozzle cap that lays down a drop or a thin line.

Can I fill these bottles on an automatic line?

The neck opens straight down into the body, so standard filling nozzles fit without an adapter. Check your filler head against one physical sample before a production run.

Do you print the bottles?

Bottles and closures ship blank as standard. Label, silk screen and sleeve decoration are OEM work, and the cap can be colour-matched to your brand. The minimum order quantity per colour is quoted per project.

Can the same bottle hold a solvent-based product?

Only after a compatibility test. The body has no barrier layer, so aggressive solvents can permeate or stress the wall over time. Send us the formulation and your target shelf life, and test it in our sample bottle before ordering.