Description
CH-409 is a 20 ml touch-up paint bottle: a clear PET body, a white PE cap that carries a long brush inside the bottle and ends in a fine tip outside, and a clear PS overcap with a hanging slot and a red seal. The body is clear, so the paint colour and the fill level read on the shelf, and the pack hangs on a peg card without a separate blister. Bottles ship blank and unprinted.

Quick answer
CH-409 is a blank 20 ml touch-up paint bottle in clear PET, closed with a white PE cap that carries a long brush inside the bottle and ends in a fine tip outside, and covered by a clear PS overcap whose rounded hanging slot lets the pack go on a peg card and whose red plug seals the tip between uses. The catalogue lists 20 ml at 1,000 sets per carton: 1,000 sets in an S3# 53 x 46 x 37.5 cm box, 12.80 kg net, 12.80 g per unit. Other volumes are quoted per project.
Two ends on one cap
The brush lives on the inside of the cap and the fine tip on the outside, so the pack gives two applicators without a second part. The brush stem runs from the cap to just above the bottom of the bottle, and the bristles are a small fan of synthetic hair; the outside steps down through two discs to a point fine enough to work paint into a scratch, a seam or a joint. The point and the bore are matched to the insert you approve, and the drawing for that insert states them.
This is a touch-up pack, not a dropper: there is no glass pipette and no rubber teat anywhere in the set. If your liquid needs a measured drop rather than a brush, that is a different set in the range — see the e-liquid bottles, which carry a moulded tip insert on the neck.

The cap, in parts
Three mouldings make the set: the white PE brush cap, the brush itself, and the clear PS overcap. The cap has a ribbed collar that takes the grip, then two stepped discs that narrow towards the point — the step is what stops the paint running back down onto the fingers. The brush is mounted on the same cap, so filling and capping on your line needs one part feeder, not two.


The overcap, the hanging slot and the red seal
The overcap is clear PS and slightly wider than the body, so it covers the tip without touching the label face. Two features sit in one moulding: a rounded slot through the top for a peg card, and a red plug inside it. When the overcap is pushed on, the fine tip presses into that plug and the brush stays wet between uses — which is what makes a part-used bottle survive in a toolbox. No shrink band, no blister and no separate plug are needed.

Volume and carton pack
One volume carries a catalogue line, and the minimum is a full carton.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 20 ml | PET bottle, PE brush cap, PS overcap | 1,000 | 1,000 | S3# 53 × 46 × 37.5 cm | 12.80 kg | 12.80 g |
Other volumes in this family are quoted per project: each needs its own body tooling and its own minimum, so no other figure is printed here. Lead times, print minimums and mixed-volume shipments are quoted per project.
Dimensions, as marked on our catalogue photograph
Our catalogue photograph carries four measurements on this set: the body stands 7 cm, the body is 2 cm across, the neck opening measures 1 cm and the closed unit — overcap included — measures 12 cm. Those are the figures marked on the photograph, and they are the only dimensions we publish; tolerances on a production run come from the drawing, which we send for the volume and the tip you order.
Where CH-409 sits in the range
CH-409 is the brush build: a clear body with a brush in the cap and a fine tip outside, for paints and fillers applied a few drops at a time. The dispensing bottles cover 30 to 500 ml with cone nozzle caps and red plugs, for beads of adhesive, oil and ink. The instant adhesive bottles go down to 5 ml with steel needles and colour-coded caps. The e-liquid bottles carry moulded tip inserts for measured drops.
Applications
Drops of paint or filler, applied with a brush, sold where the buyer wants to see the colour before opening:
- Automotive touch-up paint, primer and clear coat in body-shop sample sizes
- Wood filler, scratch repair and furniture touch-up lacquer
- Model and hobby paints, pigment washes and weathering fluids
- Leather dye, shoe cream and nail repair in small doses
- Adhesives, activators and reagents where a brush beats a nozzle
PET carries no barrier layer and the pack is not qualified as pharmaceutical or food-contact primary packaging. Solvent-based paints attack some resins: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body, a coloured cap or a different brush length is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the liquid and its solvent, whether your line needs the brush, the fine tip or both, whether the pack hangs on a card, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.
FAQ
How many parts are in the CH-409 set?
Four: the clear PET body, the white PE brush cap, the brush mounted on that cap, and the clear PS overcap with its red seal. It ships assembled and closed, or bulk-packed as components for your own filling and capping line.
What are the dimensions?
The four measurements marked on our catalogue photograph: body 7 cm tall, body 2 cm across, neck opening 1 cm, closed unit with the overcap 12 cm. Those are the figures marked on the photograph; production tolerances come from the drawing, which we send for the volume and the tip you order.
Is the fine tip metal?
The tip is the fine point moulded at the end of the white cap, with the bore inside it; on the photographs it reads as a needle because of how fine it is. The material and the bore are stated on the drawing for the tip you approve, and the sample settles it before a production run.
Can CH-409 be printed or given a coloured cap?
Yes, as an OEM item. Label, silk screen and offset print use your artwork, and the cap is moulded in colour on a project basis. The bottle carries no logo or certification mark as supplied; print minimums and per-colour minimums are quoted per project.
What is the minimum order?
1,000 sets, which is one full carton: 1,000 sets in an S3# 53 x 46 x 37.5 cm box, 12.80 kg net. The minimum is the carton, not a part carton.



