Description
CH-153 is a clear PET e-liquid bottle in 5, 8 and 10 ml, with a translucent PE tip insert and a plain white PP cap. The body is transparent rather than frosted, so the fill and the level are visible from the shelf side, and the cap carries no break ring: it closes the pack but does not record that it has been opened. Bottles ship blank and unprinted.

Quick answer
CH-153 is a blank clear PET e-liquid bottle in 5, 8 and 10 ml on one neck, with a translucent PE tip insert and a plain white PP cap that carries no break ring. Minimums are 3,500 sets for the 5 ml and 2,500 for the 8 ml, each a full 3# carton, and 1,000 sets for the 10 ml, which is half of its 2,000-set 4# carton. The wall is rigid, so the pack is dosed by tilting rather than squeezing, and the cap does not record first opening. Bottles ship blank and unprinted.
Clear wall, plain cap, no break ring
Three decisions define this pack, and each is a deliberate trade against the tamper-evident range. The body is PET, transparent instead of frosted, which shows the liquid colour and the level but hides no fill line. The tip insert is the same idea as on CH-152: a flanged PE plug that narrows the neck to a drop-size spout. The cap is a plain cone with grip ribs and a complete skirt; there is no break ring to shear, so the closure is a closure and not an opening record.

The tip insert, fitted and loose
The insert seats on the neck rim and its spout stands above it; the cap then closes over both, so the pack can be capped with the insert in place. It is a moulded PE spout, not a steel needle and not a glass pipette: there is no bulb and no dropper in this set. It ships fitted, or loose in the carton for your own filling and capping line.


Three volumes, one neck finish
The neck is common to all three volumes, so the tip insert and the cap are one part number each and a line needs one cap feeder. The photographs show the same set in three states: capped, insert fitted with the cap off, and the bare threaded neck. Height, body diameter and neck diameter are stated on the drawing for the volume you order; they are not fixed in the catalogue, so no dimension is printed here.

Volumes and carton pack
All three volumes carry a carton specification. The 10 ml is the one line where the minimum is not a full carton: 1,000 sets is half of the 2,000-set 4# carton, so a 10 ml order is priced as a part carton or rounded up to the full one.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 5 ml | PET bottle, PP cap, PE insert | 3,500 | 3,500 | 3# 53 × 46 × 40 cm | 12.60 kg | 3.60 g |
| 8 ml | PET bottle, PP cap, PE insert | 2,500 | 2,500 | 3# 53 × 46 × 40 cm | 10.25 kg | 4.10 g |
| 10 ml | PET bottle, PP cap, PE insert | 1,000 (half carton) | 2,000 | 4# 60 × 42 × 45 cm | 8.60 kg | 4.30 g |
Lead times, print minimums, cap colours and mixed-volume shipments are quoted per project.
Where CH-153 sits against CH-152

Both bottles take the same kind of tip insert and both are sold blank. The difference is the wall and the cap:
| CH-153 (this pack) | CH-152 | |
|---|---|---|
| Body | Clear PET, transparent | Frosted LDPE, translucent |
| Wall behaviour | Rigid: the pack is dosed by tilting, not by squeezing | Soft: a squeeze delivers a drop |
| Cap | Plain white PP cap, no break ring | White PP cap with break ring |
| Opening record | None — needs a shrink band or a label seal if the market requires one | Yes, the ring stays on the neck |
| Volumes | 5, 8, 10 ml | 5 to 120 ml |
Pick CH-153 when the buyer has to see the liquid, when the pack is sold as a sample or a refill inside another carton, or when a seal is applied downstream anyway. Pick CH-152 when the pack goes straight onto a shelf and has to show that it has not been opened.
Applications
The transparent body and a fine spout suit small doses that are sold on what the buyer can see:
- E-liquid and nicotine salt samples in 5 ml and 10 ml
- Flavour concentrates and mixing bases, where the colour is part of the product
- Cosmetic serums and facial oils in travel and sample sizes
- Essential oils and aromatherapy blends
- Laboratory reagents, tinctures and workshop fluids
PET carries no barrier layer and the pack is not qualified as pharmaceutical primary packaging. Test the formulation in a filled sample before a production run, and check the pack size and closure against the rules of the market you sell into.
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body, a colour-matched cap or a fitted seal is an OEM item: label, silk screen, offset print and sleeve decoration are your artwork, and the bottle carries no logo or certification mark as supplied. Minimum quantity per colour and print minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the liquid, whether the pack needs a seal, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.
FAQ
What are the minimum order quantities and cartons?
5 ml 3,500 sets in a 3# carton at 53 × 46 × 40 cm and 12.60 kg net; 8 ml 2,500 in the same carton at 10.25 kg; 10 ml 1,000 in a 4# carton at 60 × 42 × 45 cm and 8.60 kg, with 2,000 sets to the carton, so the minimum is half a carton.
Is the cap tamper-evident or child-resistant?
Neither. The cap is a plain screw cap with no break ring, so it closes the pack but does not show that it has been opened; if the market needs that, apply a shrink band or order the CH-152 range, which has a break ring. A child-resistant closure is a separate moulding, quoted on request.
Is the body squeezable?
Less than LDPE. The PET wall is rigid, so the pack is dosed by tilting it over the target rather than by squeezing; check it against the way your customer actually uses the bottle before you commit to a run.
Does the bottle ship with the tip insert fitted?
Either way. Sets ship assembled and capped, or with the body, tip insert and cap bulk-packed for your own filling and capping line.
Can the clear PET hold a solvent-based e-liquid?
Only after a compatibility test. PET carries no barrier layer, so the formulation should be tested in a filled sample before a production run. Check the pack size against the rules of the market you sell into.



