CH-252 E-Liquid Bottle — 10 to 50 ml Frosted LDPE with a Tamper-Evident Cap

CH-252 is a frosted LDPE e-liquid bottle in 10, 15, 20, 30 and 50 ml with a tamper-evident cone-nose cap and a PE drop spout insert. Blank stock.

SKU: CH-252 Category:

Description

CH-252 is a frosted LDPE e-liquid bottle in five volumes from 10 to 50 ml, closed with a cone-nosed cap that carries a tamper-evident band: the band bridges to the cap until the first turn, then shears and stays on the neck, so an opened pack cannot be closed back to look untouched. The neck also takes a PE tip insert that narrows the opening to a drop spout. The body is frosted, so the fill line shows but the liquid does not. Bottles ship blank and unprinted.

CH-252 frosted LDPE e-liquid bottles in orange, white and black tamper-evident caps on a khaki background

Quick answer

CH-252 is a blank frosted LDPE e-liquid bottle in five volumes from 10 to 50 ml, closed with a cone-nose tamper-evident cap: the band under the cap shears onto the neck at the first turn and stays there, so an opened pack reads as opened. The neck also takes a PE tip insert that narrows the opening to a drop spout, and one cap fits every volume. Minimums run from 1,000 sets at 50 ml to 2,500 at 10 ml, all full cartons.

What the cap records

The tamper evidence is mechanical, not a label. The band under the cap is moulded as one piece with the cap and joined to the skirt by thin bridges; the first turn breaks those bridges and the band drops onto the neck and stays there. After that the cap can be screwed back on as often as the user likes, and the band is still visibly separate from it. Nothing has to be applied on your filling line: no shrink sleeve, no paper seal.

The cap nose is conical and ribbed, so it can be gripped with wet fingers. It is a tamper-evident closure, not a child-resistant one: the cap turns off with a normal twist. If your market requires a child-resistant closure as well, that is a different set in this range — see CH-242, whose cap has to be pushed down before it will turn.

CH-252 frosted LDPE bottles on a dark surface: one capped, one with the PE tip insert fitted, one with the bare threaded neck

The cap, the insert, and how the pack closes two ways

Two dispensers work on the same neck. Closed with the cap alone, the bottle is a plain sealed unit and the neck is covered. Fitted with the PE tip insert, a stepped collar screws down over the neck and ends in a narrow tapered spout, and the same cap closes over the spout, so the pack can ship capped with the insert in place. The insert is a moulded PE spout: not a steel needle, not a glass pipette, and not a rubber-teat dropper.

CH-252 bottle with the PE tip insert fitted beside a loose white tamper-evident cap
Close view of the CH-252 PE tip insert on the neck and the bare threaded neck of a second bottle

The spout bore sets the drop size, and the bore is stated on the drawing for the insert you order — it is not fixed in the catalogue, so no bore figure is printed here. Tell us the drop count or the dose you need and we check it against the insert tooling before quoting.

Cap colours, and the three-part pack

The cap is moulded in colour, not painted: the photographs show orange, white and black on the same frosted body. A colour-matched cap is a per-colour item, and the minimum quantity per colour is quoted per project because it depends on the colour and the volume you pick. Bottles can ship assembled and capped, or bulk-packed as body, insert and cap for your own filling and capping line.

CH-252 parts: a capped bottle, a bottle with the tip insert fitted, a bottle lying open, and loose white and black caps

Five volumes and carton pack

Each volume carries its own carton specification, and the minimum is a full carton on all five.

CH-252 volumes, minimums and carton pack
VolumeMaterialMOQ (sets)Sets per cartonCartonCarton net weightUnit weight
10 mlLDPE bottle, PP cap, PE insert2,5002,5003# 53 × 46 × 40 cm15.75 kg6.30 g
15 mlLDPE bottle, PP cap, PE insert2,0002,0003# 53 × 46 × 40 cm13.80 kg6.90 g
20 mlLDPE bottle, PP cap, PE insert2,0002,0004# 60 × 42 × 45 cm14.60 kg7.30 g
30 mlLDPE bottle, PP cap, PE insert1,5001,5004# 60 × 42 × 45 cm12.90 kg8.60 g
50 mlLDPE bottle, PP cap, PE insert1,0001,0004# 60 × 42 × 45 cm11.80 kg11.80 g

Height, body diameter and neck finish are stated on the drawing for the volume you order; the catalogue does not fix them, so no dimension is printed here. Lead times, print minimums and mixed-volume shipments are quoted per project.

Applications

Small doses of liquid sold in a pack that has to show it is unopened:

  • E-liquid and nicotine salt packs in 10 and 20 ml
  • Flavour concentrates and mixing bases
  • Nicotine shots, boosters and sample sizes
  • Essential oils, CBD and aromatherapy blends
  • Adhesives, oils and reagents in small workshop doses

LDPE is soft and squeezes, so the dose is delivered by pressure rather than by tilting. The resin carries no barrier layer and the pack is not qualified as pharmaceutical primary packaging: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.

Where CH-252 sits in the range

CH-252 is the frosted LDPE line with the widest volume spread: 10 to 50 ml on one neck, with a tamper-evident cap, and the same cap fits every volume. CH-152 covers 5 to 120 ml in the same frosted LDPE with a break-ring cap, CH-153 is clear PET in 5, 8 and 10 ml, and CH-242 is clear PET in 10 and 20 ml with a child-resistant press-and-turn cap.

CH-252 bottles: one capped in orange, one with the bare threaded neck, one lying with the PE tip insert fitted

OEM, decoration and documentation

Bottles ship blank and unprinted. A printed body, a labelled body, a colour-matched cap or a custom insert bore is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.

Certification documents are available upon request.

Request a sample or a quotation

Send the volume, the liquid, the cap colour, the market you sell into and whether the pack must be child-resistant, plus your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.

FAQ

Is CH-252 child-resistant?

No. Its cap is tamper-evident: it turns off with a normal twist, and the band under the cap records the first opening. If your market requires a child-resistant closure, order CH-242, whose cap must be pushed down before it will turn.

How does the drop spout work?

A PE tip insert screws onto the neck and ends in a narrow tapered spout, and the same cap closes over it, so the pack ships capped with the insert fitted. The spout bore sets the drop size and is stated on the drawing for the insert you order.

What are the minimums for the five volumes?

10 ml 2,500 sets in a 3# carton, 15 ml 2,000 in a 3# carton, 20 ml 2,000 in a 4# carton, 30 ml 1,500 in a 4# carton and 50 ml 1,000 in a 4# carton. Every minimum is a full carton.

Which cap colours are available?

The caps are moulded in colour; the photographs show orange, white and black on the same frosted body. The minimum quantity per colour depends on the colour and the volume, so it is quoted per project.

Can the bottle be printed?

Yes, as an OEM item. Label, silk screen and offset print use your artwork, and the bottle carries no logo as supplied. Print minimums are quoted per project.