Description
CH-042 is a blank wide-mouth PP jar: a straight-side body with a broad threaded mouth, a ribbed PP screw cap, and a translucent PE inner seal with a tab that sits under the cap. The broad mouth lets thick pastes, creams and powders go in and out without a narrow neck. The catalogue lists one volume, 150 ml, in six body and cap colours. Jars ship blank and unprinted.

Quick answer
CH-042 is a blank 150 ml wide-mouth PP jar with a ribbed PP screw cap and a translucent PE inner seal. The catalogue minimum is 250 sets per carton: 250 jars in an S3# 53 × 46 × 37.5 cm box, 10.50 kg net, 42.00 g per unit. Body diameter, height and mouth finish are stated on the drawing; the catalogue does not fix them, and per-colour minimums and lead times are quoted per project.
Why the mouth is wide
The mouth runs almost the full width of the body, so a spatula or finger reaches the bottom and thick products do not have to be forced through a narrow neck. The PE inner seal sits between the product and the cap: it presses against the mouth when the cap is screwed down, and its tab lets it be lifted out. The seal is a moulded PE disc, not a foil liner.

The cap and the disc under it
The cap is a ribbed PP screw cap; the whole skirt carries fine vertical ribs that give a grip with wet or oily fingers. Under it, the translucent PE inner seal carries a small tab that stays visible at the edge. The two close as one pack: seal in the mouth, cap screwed over it.

Six colours
The jar and its cap are moulded in the same colour; the photographs show white, light cyan, pink, yellow, green and blue. A colour-matched jar and cap is a per-colour item, and the minimum quantity per colour is quoted per project because it depends on the colour and the volume you pick.

The parts, side by side
Three mouldings make the set: the open PP jar with its threaded neck, the translucent PE inner seal, and the ribbed PP screw cap. Jars can ship assembled and capped, or bulk-packed as body, seal and cap for your own filling and capping line.

Volume and carton pack
The 500 ml member of this family is a separate catalogue model, CH-419, with its own drawing; it is not listed here. Other volumes, per-colour minimums, print minimums and lead times are quoted per project.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 150 ml | PP jar, PP screw cap, PE inner seal | 250 | 250 | S3# 53 × 46 × 37.5 cm | 10.50 kg | 42.00 g |
Where CH-042 sits in the range
CH-042 opens the wide-mouth jar line in the range: a straight-side PP body for pastes, creams and powders that a narrow-neck bottle cannot hold. The dispensing bottles and instant adhesive bottles are narrow-neck closures for beads and drops of liquid.
Applications
PP carries no barrier layer and the pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Check the formulation against the resin in a filled sample before a production run, and against the rules of the market you sell into.
- Creams, balms, waxes and thick pastes in sample and retail sizes
- Powders, granules and small solid parts that need a wide opening
- Ointments, polish and workshop compounds scooped or wiped out
- Cosmetic and personal-care sample jars where the colour codes the product
OEM, decoration and documentation
Jars ship blank and unprinted. A printed body, a labelled body or a colour-matched jar and cap is an OEM item: label, silk screen and offset print are your artwork, and the jar carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the product and its solvent, the colours you need, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.
FAQ
How many parts are in the CH-042 set?
Three: the PP jar, the translucent PE inner seal, and the ribbed PP screw cap. It ships assembled and capped, or bulk-packed as body, seal and cap for your own filling and capping line.
Which colours are available?
White, light cyan, pink, yellow, green and blue, with the jar and cap matched in the same colour. The minimum quantity per colour depends on the colour and the volume, so it is quoted per project.
What about the 500 ml version?
The 500 ml member of this family is a separate catalogue model, CH-419, with its own drawing. Ask for it separately and we quote it on its own tooling.
Is the inner seal a foil liner?
No. It is a translucent moulded PE disc with a tab that sits under the screw cap; it presses against the mouth when the cap is screwed down.
What is the minimum order?
250 sets, which is one full carton: 250 jars in an S3# 53 × 46 × 37.5 cm box, 10.50 kg net. The minimum is the carton, not a part carton.



