Description
CH-242 is a clear PET e-liquid bottle in 10 and 20 ml with a press-and-turn cap: the cap has to be pushed down before it will turn, and it carries a band that shears onto the neck at first opening. The band is embossed PRESS & TURN and the cap can carry a braille legend. The body is transparent, so the fill and the level are visible. Bottles ship blank and unprinted.

Quick answer
CH-242 is a blank clear PET e-liquid bottle in 10 and 20 ml with a press-and-turn cap: it must be pushed down before it turns, so it is child-resistant, and it carries a band that shears onto the neck at first opening, so it is tamper-evident too. The band is embossed PRESS & TURN and the cap can carry a braille legend. Minimums are 2,500 sets for the 10 ml in a 3# carton and 2,000 for the 20 ml in a 4# carton. Bottles ship blank and unprinted.
Two locks in one cap
The cap does two jobs that are often asked for together. Pushing down before turning is the child-resistant part: a plain turn does not open it, so a child who has not been shown the motion is unlikely to get in. The band under the cap is the tamper-evident part: the first proper opening shears the bridge between band and cap, the band stays on the neck, and the pack cannot be closed back to look untouched. Both locks sit in one moulding, so there is no separate shrink band to apply.

The cap, from both sides
The cone on top, the grip ribs and the band are the parts a buyer will judge. On the loose cap you can see the band as a separate ring under the skirt, and the embossed legend reads PRESS & TURN on the ring, which is the instruction and the explanation in one place.

Bottle, tip insert and cap as three parts
The body is PET, the cap is PP and the tip insert is PE. The insert seats on the neck rim and narrows the opening to a drop-size spout; the cap closes over the spout, so the set can be shipped capped with the insert in place. It is a moulded spout, not a steel needle and not a glass pipette. The set ships assembled and capped, or bulk-packed in three parts for your own filling and capping line.


Volumes and carton pack
Two volumes carry a carton specification, and on both the minimum is a full carton.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 10 ml | PET bottle, PP cap, PE insert | 2,500 | 2,500 | 3# 53 × 46 × 40 cm | 15.75 kg | 6.30 g |
| 20 ml | PET bottle, PP cap, PE insert | 2,000 | 2,000 | 4# 60 × 42 × 45 cm | 14.60 kg | 7.30 g |
Height, body diameter and neck diameter are stated on the drawing for the volume you order; they are not fixed in the catalogue, so no dimension is printed here. Lead times, print minimums, cap colours and mixed-volume shipments are quoted per project.
Child-resistant, and what that means for your market
The closure is a press-and-turn design, which is the mechanism most child-resistant e-liquid packs use. Whether a pack passes the protocol of the market you sell into is settled by testing, and the test is run on the filled pack, not on the empty bottle: it covers cap removal, the closure staying shut after the test, and the pack holding its contents. We supply samples for that test; we do not publish a third-party certificate for this set, so plan the test into your launch rather than after it.
Two practical notes. The press-and-turn motion is harder for elderly or weak-grip users than a plain screw cap, which is why the trade allows a non-child-resistant alternative for some formats; check which one your market requires. And if you also need a braille legend on the cap, say so before tooling: the dots are cut into the mould insert, so the wording is fixed once the tool is made.
Where CH-242 sits in the range
CH-242 is the child-resistant build. CH-152 is a frosted LDPE squeeze bottle from 5 to 120 ml with a break-ring cap, and CH-153 is a clear PET bottle in 5, 8 and 10 ml with a plain cap. Choose CH-242 when the market requires a child-resistant closure and the pack must also show that it has not been opened.

Applications
Small doses of liquid that has to be kept away from children, and sold where the buyer must be able to see that the pack is unopened:
- Nicotine salt and e-liquid packs in 10 ml and 20 ml
- Flavour concentrates and mixing bases
- Nicotine shots, boosters and sample sizes
- Essential oils and aromatherapy blends
- Laboratory reagents and workshop fluids
PET carries no barrier layer and the pack is not qualified as pharmaceutical primary packaging. Test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body, a colour-matched cap or a braille legend on the cap is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Minimum quantity per colour and print minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the liquid, the market you sell into and whether the cap needs a braille legend, plus your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.
FAQ
Is this cap child-resistant and tamper-evident?
Both. It has to be pushed down before it will turn, which is the child-resistant mechanism, and the band under the cap shears onto the neck at first opening, so an opened pack cannot be closed back to look untouched.
Is the pack certified child-resistant?
The closure is a press-and-turn design, which is the mechanism used for child-resistant packs, but the test is run on the filled pack by your market’s protocol. We supply samples for that test and do not publish a third-party certificate, so plan the test into your launch.
What are the minimum order quantities and cartons?
10 ml 2,500 sets in a 3# carton at 53 × 46 × 40 cm and 15.75 kg net; 20 ml 2,000 sets in a 4# carton at 60 × 42 × 45 cm and 14.60 kg. Both minimums are full cartons.
Does the cap carry braille?
The cap can carry a braille legend. The dots are cut into the mould insert, so the wording is fixed when the tool is made: confirm the legend you need before tooling.
Does the bottle ship with the tip insert fitted?
Either way. Sets ship assembled and capped, or bulk-packed as body, tip insert and cap for your own filling and capping line.



