Description
CH-035 is a blank mist spray bottle: a white HDPE body, a white PP mist pump that screws onto a short neck, and a clear cup-shaped overcap that covers the pump between uses. The pump has a ribbed locking collar and a block actuator with a flat top and a small nozzle orifice. The catalogue lists three volumes, 60, 100 and 250 ml, on the same build. Bottles ship blank and unprinted.

Quick answer
CH-035 is a blank white HDPE mist spray bottle in 60, 100 and 250 ml, closed with a white PP mist pump and a clear cup overcap. The catalogue minimums are full cartons: 1,000 sets of 60 ml, 700 of 100 ml and 280 of 250 ml, all in a 2# 60 × 42 × 49 cm carton. Spray rate, neck finish and body dimensions are stated on the drawing for the volume you order; the catalogue does not fix them, so no figure is printed here.
The pump and the overcap
The pump screws onto a short neck that carries two coarse thread turns and a step ring; the ribbed collar takes the grip, and the block actuator presses down to spray. A clear cup overcap pushes over the pump to keep the orifice clean and the actuator protected between uses. The pump carries a dip tube that reaches the bottom of the body.

The neck, in close-up
The neck is short with two coarse thread turns and a step ring above a rounded shoulder. The body is white HDPE, which is firm and light and takes a printed label or a silk-screen mark; it is not a clear bottle, so the fill level does not read through the wall.


The parts, separated
Three mouldings make the set: the white HDPE body with its threaded neck, the white PP mist pump with its dip tube, and the clear overcap. The pack can ship assembled and closed, or bulk-packed as body and pump for your own filling and capping line.

Volumes and carton pack
Other volumes in this family are quoted per project: each needs its own body tooling and its own minimum, so no other figure is printed here. Lead times, print minimums and mixed-volume shipments are quoted per project.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 60 ml | HDPE bottle, PP mist pump, clear overcap | 1,000 | 1,000 | 2# 60 × 42 × 49 cm | 15.50 kg | 15.50 g |
| 100 ml | HDPE bottle, PP mist pump, clear overcap | 700 | 700 | 2# 60 × 42 × 49 cm | 13.30 kg | 19.00 g |
| 250 ml | HDPE bottle, PP mist pump, clear overcap | 280 | 280 | 2# 60 × 42 × 49 cm | 7.70 kg | 27.50 g |
Where CH-035 sits in the range
CH-035 is the fine-mist build: a firm HDPE body with a PP pump that delivers a spray rather than a bead. The dispensing bottles cover 30 to 500 ml with cone nozzle caps and red plugs for beads of adhesive, oil and ink. The instant adhesive bottles go down to 5 ml with steel needles and colour-coded caps.
Applications
HDPE carries no barrier layer and the pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Solvent-based liquids attack some resins: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.
- Fine mist of water, toner or household spray in small and medium sizes
- Cleaning and polishing sprays, lubricants and air fresheners
- Cosmetic and sample-size mists where a pump is preferred over a squeeze tube
- Workshop and hobby sprays for light coatings and activators
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body, a colour-matched pump or a different dip-tube length is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the liquid and its solvent, whether your line needs the overcap, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.
FAQ
How many parts are in the CH-035 set?
Three: the white HDPE body, the white PP mist pump with its dip tube, and the clear overcap. It ships assembled and closed, or bulk-packed as body and pump for your own filling and capping line.
What volumes are listed?
60 ml, 100 ml and 250 ml. The catalogue minimums are 1,000 sets of 60 ml, 700 of 100 ml and 280 of 250 ml, every minimum a full carton.
What is the spray rate or neck size?
Not fixed in the catalogue. Spray rate, neck finish and body dimensions are stated on the drawing for the volume you order, and the sample settles them before a production run.
Can CH-035 be printed or given a coloured pump?
Yes, as an OEM item. Label, silk screen and offset print use your artwork, and the pump is moulded in colour on a project basis. The bottle carries no logo as supplied; print minimums and per-colour minimums are quoted per project.
Is CH-035 food or cosmetic grade?
No. The pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Test the formulation in a filled sample before a production run, and check it against the rules of the market you sell into.



