CH-059 Instant Adhesive Tube — 1 ml / 2 ml HDPE Tube with Tapered Nozzle and Screw Plug

CH-059 is a translucent milky HDPE instant adhesive tube in 1 and 2 ml, with a long tapered nozzle, a ribbed screw plug and a white or black overcap. OEM Shenzhen.

SKU: CH-059 Category:

Description

CH-059 is a blank instant adhesive tube: a translucent milky HDPE body that rounds into a long tapered nozzle, closed at the base by two coarse thread turns and a ribbed short screw plug, and covered by a cylindrical overcap in white or black. The catalogue lists two small volumes, 1 and 2 ml; the difference between them is the body length, while the diameter, nozzle and cap stay the same. Tubes ship blank and unprinted.

CH-059 instant adhesive tubes on a khaki background: a tall tube with a black overcap, a tall tube with a white overcap and a shorter 1 ml tube with a white overcap

Quick answer

CH-059 is a blank 1 and 2 ml instant adhesive tube in translucent HDPE, with a long tapered nozzle, a ribbed screw plug at the base and a white or black overcap. The catalogue minimum is 10,000 tubes per carton on both volumes: 1 ml in an S3# 53 × 46 × 37.5 cm carton at 14.10 kg net, 2 ml in a 4# 53 × 46 × 40 cm carton at 16.10 kg net. The nozzle bore and the adhesive dose are stated on the drawing for the nozzle you order; the catalogue does not fix them.

The nozzle, and what it does not carry

The shoulder rounds into a long tapered nozzle with a small step where it meets the shoulder; the nozzle itself is the outlet, with no steel needle pushed into it and no inner plug or dip tube. The bore sets the bead size and is stated on the drawing for the nozzle you approve; it is not fixed in the catalogue, so no bore figure is printed here.

CH-059 instant adhesive tube on a dark brown background: the tube standing with its long tapered nozzle exposed and the white overcap beside it
CH-059 nozzle close-up: tapered nozzle with a small step at the shoulder, translucent HDPE body and the white overcap behind

The base and the screw plug

The base carries two coarse thread turns and a short ribbed screw plug that closes the filling end; the plug is what the tube is filled through on your line. The overcap slips over the nozzle to keep it clean between uses.

CH-059 base close-up: the tube lying at an angle with its threaded filling end toward the camera and the ribbed screw plug beside it

The parts, separated

Three parts make the set: the HDPE tube body with its long tapered nozzle and open base thread, the ribbed screw plug, and the cylindrical overcap with its flat dome top. The 1 ml and 2 ml tubes share the same diameter, nozzle and cap; only the body length changes.

CH-059 parts: the tube body with its long tapered nozzle and open base thread, the ribbed screw plug, and the white overcap

Volumes and carton pack

Other volumes are quoted per project. Lead times, print minimums and mixed-volume shipments are quoted per project.

CH-059 volumes, minimums and carton pack
VolumeMaterialMOQ (sets)Sets per cartonCartonCarton net weightUnit weight
1 mlHDPE tube, PE screw plug, PE overcap10,00010,000S3# 53 × 46 × 37.5 cm14.10 kg1.41 g
2 mlHDPE tube, PE screw plug, PE overcap10,00010,0004# 53 × 46 × 40 cm16.10 kg1.61 g

Where CH-059 sits in the range

CH-059 is the smallest instant adhesive pack: a squeeze tube for a single drop or bead of thin adhesive. The instant adhesive bottles in the range go up to 5 ml and above with steel needles and colour-coded caps, and the dispensing bottles cover larger liquid doses with cone nozzle caps.

Applications

HDPE carries no barrier layer and the pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Solvent-based adhesives attack some resins: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.

  • Single-drop instant adhesives, cyanoacrylate and small reagent doses
  • Hobby, model and repair glue in pocket-sized packs
  • Sample and trial sizes of thin liquids sold by the drop
  • Cosmetic and laboratory mini-tubes where a tapered nozzle controls the bead

OEM, decoration and documentation

Tubes ship blank and unprinted. A printed body, a labelled body or a coloured overcap is an OEM item: label, silk screen and offset print are your artwork, and the tube carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.

Certification documents are available upon request.

Request a sample or a quotation

Send the volume, the adhesive and its solvent, the overcap colour, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.

FAQ

Is there a steel needle?

No. The tapered nozzle is the outlet; there is no steel needle, no dip tube and no inner plug in the set.

What is the difference between the 1 ml and 2 ml tubes?

Only the body length. The diameter, the tapered nozzle and the overcap are the same on both.

What is the nozzle bore or adhesive dose?

The bore sets the bead size and is stated on the drawing for the nozzle you approve; it is not fixed in the catalogue, so no bore figure is printed here.

What is the minimum order?

10,000 tubes on both volumes, every minimum a full carton: 1 ml in an S3# carton, 2 ml in a 4# carton.

Which overcap colours are available?

The photographs show white and black overcaps. Other colours are moulded on a project basis, and the per-colour minimum is quoted per project.