CH-152 E-Liquid Bottle — 5 ml to 120 ml Frosted LDPE with a Tamper-Evident Cap

CH-152 is a frosted LDPE e-liquid bottle from 5 to 120 ml with a translucent tip insert and a white tamper-evident cap. Blank stock, MOQ from 450 sets.

SKU: CH-152 Category:

Description

CH-152 is a frosted LDPE bottle for e-liquid and other small doses, supplied from 5 ml to 120 ml on one neck. Each set carries a translucent tip insert that narrows the neck to a drop-size spout, and a white tamper-evident cap whose break ring stays on the neck after the first opening. The body is not glass and not clear: the satin surface diffuses light while staying translucent enough to show the colour of the fill. Bottles ship blank and unprinted.

CH-152 frosted LDPE e-liquid bottles in four sizes with white tamper-evident cone caps, on a khaki background

Quick answer

CH-152 is a blank frosted LDPE e-liquid bottle in 5, 10, 15, 30, 50, 60 and 120 ml on one neck, with a translucent PE tip insert and a white tamper-evident PP cap whose break ring stays on the neck after the first opening. Minimums are 3,000 sets for the 5 ml, 2,500 for the 10 ml, 2,000 for the 15 ml and 30 ml, 1,000 for the 50 ml and 450 for the 120 ml, each a full carton; the 60 ml row is quoted per project at 11.00 g unit weight. The cap is tamper-evident, not child-resistant. Bottles ship blank and unprinted.

Frosted wall, fine spout, break ring

Three decisions define the pack. The body is LDPE with a satin finish, which takes the shine off a shelf display and hides the fill line from a casual look without turning the bottle opaque. The tip insert drops into the neck and reduces the opening to a spout, so a squeeze gives drops rather than a stream. The cap carries its break ring on the skirt: turn it once and the ring shears off onto the neck, so an opened bottle reads as opened.

CH-152 frosted e-liquid bottles on a dark surface, showing the satin wall, white caps and the tip insert

The tip insert, fitted and loose

The insert is a translucent PE moulding with a flange that seats on the neck rim; the spout stands above it and the cap closes over both. It ships fitted, or loose in the carton for your own line. It is a moulded spout, not a steel needle and not a glass dropper: there is no pipette and no bulb in this pack.

CH-152 bottle with the translucent tip insert fitted and the white tamper-evident cap standing beside it
CH-152 parts: the frosted bottle with the threaded neck bare, the translucent tip insert and the white cap with its break ring

One neck across the range

The neck finish is common to every volume, so the tip insert and the cap are one part number each. The photographs show the same set at three heights: capped, insert fitted with the cap off, and the bare neck. Height, body diameter and neck diameter are stated on the drawing for the volume you order; they are not fixed in the catalogue, so no dimension is printed here.

CH-152 bottles in three sizes: one capped, one with the tip insert fitted, one with the bare threaded neck

Volumes and carton pack

Six volumes carry a full carton specification below. The 60 ml row is not fixed in the catalogue, so its minimum and carton are quoted per project.

CH-152 volumes, minimums and carton pack
VolumeMaterialMOQ (sets)Sets per cartonCartonCarton net weightUnit weight
5 mlLDPE bottle, PP cap, PE insert3,0003,000S3# 53 × 46 × 37.5 cm14.70 kg4.90 g
10 mlLDPE bottle, PP cap, PE insert2,5002,500S3# 53 × 46 × 37.5 cm13.75 kg5.50 g
15 mlLDPE bottle, PP cap, PE insert2,0002,0004# 60 × 42 × 45 cm11.60 kg5.80 g
30 mlLDPE bottle, PP cap, PE insert2,0002,0004# 60 × 42 × 45 cm16.60 kg8.30 g
50 mlLDPE bottle, PP cap, PE insert1,0001,0004# 60 × 42 × 45 cm10.80 kg10.80 g
60 mlLDPE bottle, PP cap, PE insertquoted per projectquoted per projectquoted per projectquoted per project11.00 g
120 mlLDPE bottle, PP cap, PE insert4504504# 60 × 42 × 45 cm8.69 kg19.30 g

Minimums match a full carton on every line that carries pack data. Lead times, print minimums and mixed-volume shipments are quoted per project.

Applications

The fine spout doses a small volume and the break ring makes the pack saleable off a shelf:

  • E-liquid and nicotine salt packs, 10 ml and 30 ml being the common sizes
  • Flavour concentrates and mixing bases
  • Cosmetic serums, facial oils and travel sizes
  • Essential oils and aromatherapy blends
  • Laboratory reagents, tinctures and workshop fluids

LDPE has no barrier layer and the pack is not qualified as pharmaceutical primary packaging. Test the fill against a sample, and check the pack size against the rules of the market you sell into.

Tamper-evident, not child-resistant

CH-152 family: two frosted LDPE bottles standing, one empty bottle lying on its side, and two white tamper-evident caps

These are two different closures and they do not interchange. The cap on CH-152 shows first opening through its break ring, which is what most shelf and direct-to-consumer packs need. A child-resistant cap is a separate moulding with a different neck finish; if your market requires one, specify it at enquiry and we quote the other set rather than adapt this one.

OEM, decoration and documentation

Bottles ship blank and unprinted. A printed body, a labelled body or a colour-matched cap is an OEM item: label, silk screen, offset print and sleeve decoration are your artwork, and the bottle carries no logo or certification mark as supplied. Minimum quantity per colour and print minimums are quoted per project.

Certification documents are available upon request.

Request a sample or a quotation

Send the volume, whether you need a child-resistant closure, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

What are the minimum order quantities and cartons?

5 ml 3,000 sets in an S3# carton at 53 × 46 × 37.5 cm and 14.70 kg net; 10 ml 2,500 in the same carton at 13.75 kg; 15 ml 2,000 in a 4# carton at 60 × 42 × 45 cm and 11.60 kg; 30 ml 2,000 at 16.60 kg; 50 ml 1,000 at 10.80 kg; 120 ml 450 at 8.69 kg. The 60 ml minimum is quoted per project.

Is the closure child-resistant?

No, it is tamper-evident only. The break ring shears onto the neck when the cap is first turned, so an opened pack reads as opened. A child-resistant closure is a different moulding and neck finish, quoted on request.

Does the bottle ship with the tip insert fitted?

Either way. Sets ship assembled and capped, or with the body, tip insert and cap bulk-packed for your own filling and capping line.

What is the body made of, and is it clear?

The body is LDPE with a frosted satin finish, so it diffuses light rather than showing the fill sharply. The closure is PP and the tip insert is PE. There is no barrier layer and no glass.