Description
CH-013 is a blank instant adhesive bottle in an oval, fan-shaped body with a long tapered nozzle cap. It is built for cyanoacrylate and other fast-setting liquids that need a narrow, targeted bead or drop. The catalog lists 15 ml, 20 ml and 50 ml sizes in HDPE with a PE nozzle cap; bottles ship unprinted so you can decorate them for your own brand.

Quick answer
CH-013 is a 15–50 ml blank HDPE+PE instant adhesive bottle with a long tapered nozzle cap. The ribbed collar screws onto the neck and the stepped cone ends in a fine dispensing tip. It is a separate bottle shape from the CH-001 range, not a cap option on that body.
Long tapered nozzle for a targeted bead

The closure has a ribbed collar that grips the threaded neck, a stepped tapered cone and a fine tip at the end. Squeeze the oval body to feed liquid to the tip; the narrow cone keeps a drop or a thin bead aimed at the joint instead of spreading over the surrounding surface.

The nozzle cap lifts off to reveal the threaded neck. Bottles can ship capped or loose; where a filler caps in-house, the closure is supplied in bulk and the neck finish is confirmed on the approved drawing before sampling.
Long and short nozzle options on the same neck

The photographed range shows both a long tapered nozzle and a short nozzle on the same neck, plus an open-neck bottle for reference. The longer cone reaches into tighter joints; the shorter nozzle gives a sturdier cap for general dispensing. Nozzle length and body dimensions are not marked on the catalog, so confirm dimensions against a physical sample before tooling or artwork.

Size, weight and packing

| Nominal volume | Unit net weight (g) | MOQ (sets) | Units per carton | Carton size (cm) | Carton net weight (kg) |
|---|---|---|---|---|---|
| 15 ml | 6.50 | 2300 | 2300 | S3# 52*45*36.5 | 14.95 |
| 20 ml | 6.80 | 2000 | 2000 | 4# 60*42*45 | 13.60 |
| 50 ml | 11.50 | 1000 | 1000 | 4# 60*42*45 | 11.50 |
Material: HDPE bottle + PE closure parts (per factory catalog). The catalog lists the 15 ml, 20 ml and 50 ml HDPE+PE lines for CH-013; other volumes are not quoted here. Exact resin grade and neck finish are confirmed on the approved drawing before sampling.
Applications
- Instant and fast-setting adhesives, including cyanoacrylate — drop or bead on joints and parts
- Thin oils and light lubricants — precision oiling of small bearings, hinges and tooling
- Inks, pigments and dyes — small-batch and sample filling
- Craft, model, repair and retail kits — single-project packs
Compatibility with a specific formulation must be confirmed by the buyer, because shelf life depends on the liquid, not only on the bottle. Test your own formulation in a sample bottle before a production run. The bottle is not marketed as food-contact, cosmetic-grade or pharmaceutical primary packaging, and no certification claim is made on the product itself.
CH-013 versus CH-001
Both are instant adhesive bottles, but they are separate body shapes. CH-001 runs 5–100 ml on a straight-wall translucent body with colour-coded cone caps and an optional internal steel pin. CH-013 uses an oval, fan-shaped body and a long tapered nozzle cap, listed in the catalog in 15 ml, 20 ml and 50 ml HDPE+PE sizes. Choose CH-001 for the wider six-size range and the steel-pin option; choose CH-013 for the oval body and the long-tapered nozzle profile.
OEM, decoration and documentation
Bottles are supplied blank. Label, silk screen and sleeve decoration, plus nozzle cap colour matching to your brand, are OEM work. No logo, badge or certification mark is printed on the standard bottle.
Minimum order quantity for each size is listed in the table above, counted in sets (one bottle with one cap). Lead time, decoration method, artwork requirements and colour minimums are quoted per project, because they depend on the size mix and the cap chosen.
Certification and material documents are available upon request. No certification mark is claimed on the product itself, and no food-contact or pharmaceutical claim is made for these bottles.
Packing and shipping
Units per carton, carton size and carton net weight are listed in the table above. Bottles and caps can be packed separately or assembled, depending on how your line is set up. Inner liner, export packing and mixed orders are confirmed at quotation.
Request a sample or a quotation
Send the liquid you are packing, whether you need the long or short nozzle, and your annual volume. We reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.
FAQ
Is CH-013 a version of the CH-001 bottle with a different cap?
No. CH-013 has a distinct oval, fan-shaped body with a long tapered nozzle cap, while CH-001 uses a straight-wall body with colour-coded cone caps and an optional steel pin. They are separate products, not cap variations on the same mould.
What sizes does CH-013 come in?
The factory catalog lists 15 ml, 20 ml and 50 ml HDPE+PE sizes for CH-013. Ask our team whether another size can be quoted for your project.
Long nozzle or short nozzle?
The long tapered nozzle reaches into tighter joints and aims a narrow bead; the short nozzle is sturdier for general dispensing. Both are shown on the same neck in the product photos. Specify the nozzle you need when you request a quote.
What is the minimum order quantity?
MOQ varies by size (15 ml: 2300 sets; 20 ml: 2000 sets; 50 ml: 1000 sets), one bottle with one nozzle cap. Lead time and any mixed-order arrangement are confirmed at quotation.
Which liquids can I put in it?
Instant adhesives, thin oils, lubricants, inks, pigments and cleaners are the usual categories. The HDPE body is not a barrier layer, so long-term storage of aggressive solvents is not recommended. Compatibility must be tested with your own formulation in a sample bottle.




