Description
CH-391 is a blank squeeze bottle: a frosted semi-translucent LDPE cylindrical body with a short sloping shoulder to a short externally threaded neck, a white PP ribbed screw collar with a thin disc and flange ring, a long tapered nozzle, and a small cup-shaped tethered flip cap. The catalogue lists three volumes, 240, 360 and 500 ml. Bottles ship blank and unprinted.

Quick answer
CH-391 is a blank squeeze bottle in 240, 360 and 500 ml: a frosted semi-translucent LDPE body with a white PP ribbed cap, tapered nozzle and tethered flip cap. Catalogue minimums are full cartons: 300 sets of 240 ml, 200 of 360 ml and 140 of 500 ml in a 2# 60 × 42 × 49 cm carton. The nozzle bore and the body dimensions are stated on the drawing for the volume you order; the catalogue does not fix them, so no figure is printed here.
The bottle and its closure
The body is a frosted semi-translucent LDPE cylinder with a short sloping shoulder and a short externally threaded neck. The white PP ribbed cap screws onto the neck with a vertically ribbed skirt, a thin disc and a flange ring; the long tapered nozzle runs through it, and a thin tether keeps the small cup-shaped flip cap attached when the nozzle is open. The bottle carries no print, logo or recycled mark as supplied.

The tapered nozzle and tethered cap
The cap starts at a ribbed screw collar, steps over a thin disc and flange ring, then runs to a long tapered nozzle. The nozzle is the outlet: squeeze the flexible LDPE body to push the liquid through the tip. The small flip cap cups over the tip between uses and stays on its thin tether; there is no steel needle, dip tube or inner plug. The bore sets the bead size and is stated on the drawing for the volume you approve; it is not fixed in the catalogue, so no bore figure is printed here.

Three mouldings
Three mouldings make the set: the frosted LDPE bottle with its bare threaded neck, the white PP ribbed cap with its tapered nozzle, and the tethered small flip cap. The pack can ship assembled and closed, or bulk-packed as body and cap for your own filling and capping line.

Where a squeeze bottle is used

Illustration of a workshop and craft setting — not a customer photograph.

Illustration of a model and craft setting — not a customer photograph.

Illustration of a retail and trade display — not a customer photograph.
Volumes and carton pack
Other volumes are quoted per project: each needs its own body tooling and its own minimum. Lead times, print minimums and mixed-volume shipments are quoted per project.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 240 ml | LDPE bottle, PP ribbed cap, tapered nozzle and tethered flip cap | 300 | 300 | 2# 60 × 42 × 49 cm | 6.96 kg | 23.20 g |
| 360 ml | LDPE bottle, PP ribbed cap, tapered nozzle and tethered flip cap | 200 | 200 | 2# 60 × 42 × 49 cm | 5.60 kg | 28.00 g |
| 500 ml | LDPE bottle, PP ribbed cap, tapered nozzle and tethered flip cap | 140 | 140 | 2# 60 × 42 × 49 cm | 5.88 kg | 42.00 g |
Where CH-391 sits in the range
CH-391 is a squeeze bottle in the plastic bottle range: a flexible LDPE body for a controlled squeeze dose through a tapered nozzle. The dispensing bottles cover larger liquid doses with cone nozzle caps and plugs, and the instant adhesive bottles pack thin glue in small bead-control bottles.
Applications
LDPE carries no barrier layer and the pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Solvent-based or aggressive liquids attack some resins: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.
- Controlled squeeze doses of craft, hobby and workshop liquids
- Model, repair and hardware trade packs
- Sample and trial sizes of pourable liquids
- Retail and trade display packs in three heights
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body or a coloured cap is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the liquid and its solvent, the cap colour you need, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.
FAQ
How many parts are in the CH-391 set?
Three: the frosted LDPE bottle with its threaded neck, the white PP ribbed cap with its tapered nozzle, and the tethered small flip cap. It ships assembled and closed, or bulk-packed as body and cap for your own filling and capping line.
What volumes are listed?
240, 360 and 500 ml on this model. Minimums are full cartons: 300 sets of 240 ml, 200 of 360 ml and 140 of 500 ml.
How does the nozzle dispense?
The tapered nozzle is the outlet: squeeze the flexible LDPE body to push the liquid through the tip, then cup the flip cap back over it. There is no steel needle, dip tube or inner plug in the set.
What is the nozzle bore or body size?
Not fixed in the catalogue. The bore and the body dimensions are stated on the drawing for the volume you approve, and the sample settles them before a production run.
What is the minimum order?
A full carton: 300 sets of 240 ml, 200 of 360 ml or 140 of 500 ml, in a 2# 60 × 42 × 49 cm carton. The minimum is the carton, not a part carton.



