Description
CH-219 is a blank 20 ml instant adhesive bottle: a white HDPE rounded-shoulder square body with a short two-turn threaded neck, a white PE stepped nozzle insert with a ribbed round collar, a thin flange step and two tapering tiers ending in a fine tip, and a ribbed blue PE cone cap with a short skirt and a flat closed top. The catalogue lists one volume, 20 ml. Bottles ship blank and unprinted.

Quick answer
CH-219 is a blank 20 ml white HDPE instant adhesive bottle with a white PE stepped nozzle insert and a ribbed blue PE cone cap. The catalogue minimum is 1,000 sets per carton: 1,000 sets in an S3# 53 × 46 × 37.5 cm carton at 11.10 kg net, 11.10 g per unit. The nozzle bore and the body dimensions are stated on the drawing for the nozzle you order; the catalogue does not fix them, so no figure is printed here.
The bottle and its closure
The body is a white HDPE rounded-shoulder square bottle with a short neck that carries two coarse thread turns. The white PE stepped nozzle insert pushes into the neck; the blue ribbed cone cap slips over the insert to keep the fine tip clean between uses. The bottle carries no print, logo or recycled mark as supplied.

The stepped nozzle
The insert starts at a ribbed round collar, steps over a thin flange ring, then runs two tapering tiers down to a fine tip. The nozzle is the outlet: there is no steel needle pushed into it and no inner plug or dip tube. The bore sets the bead size and is stated on the drawing for the nozzle you approve; it is not fixed in the catalogue, so no bore figure is printed here.

Three mouldings
Three mouldings make the set: the white HDPE bottle with its bare threaded neck, the white PE stepped nozzle insert, and the blue ribbed cone cap. The pack can ship assembled and closed, or bulk-packed as body, insert and cap for your own filling and capping line.

Where a 20 ml bottle is used

Illustration of a workshop repair setting — not a customer photograph.

Illustration of a model and craft setting — not a customer photograph.

Illustration of a retail and trade display — not a customer photograph.
Volume and carton pack
Other volumes in this family are quoted per project: each needs its own body tooling and its own minimum. Lead times, print minimums and mixed-volume shipments are quoted per project.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 20 ml | HDPE bottle, PE stepped nozzle insert, PE cone cap | 1,000 | 1,000 | S3# 53 × 46 × 37.5 cm | 11.10 kg | 11.10 g |
Where CH-219 sits in the range
CH-219 is a mid-size instant adhesive bottle for a controlled bead of thin glue. The instant adhesive bottles in the range go down to 5 ml with steel needles and colour-coded caps, and the dispensing bottles cover larger liquid doses with cone nozzle caps and red plugs.
Applications
HDPE carries no barrier layer and the pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Solvent-based adhesives attack some resins: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.
- Single-bead instant adhesives, cyanoacrylate and small reagent doses
- Hobby, model and repair glue in pocket and bench-side packs
- Sample and trial sizes of thin liquids sold by the drop
- Workshop and hardware trade packs where a stepped nozzle controls the bead
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body or a coloured cap is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the adhesive and its solvent, the cap colour you need, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.
FAQ
How many parts are in the CH-219 set?
Three: the white HDPE bottle with its threaded neck, the white PE stepped nozzle insert, and the blue ribbed PE cone cap. It ships assembled and closed, or bulk-packed as body, insert and cap for your own filling and capping line.
What volume is listed?
20 ml on this model. Other volumes in the family are quoted per project on their own tooling and minimum.
Is there a steel needle?
No. The stepped PE nozzle insert is the outlet; there is no steel needle, no dip tube and no inner plug in the set.
What is the nozzle bore or body size?
Not fixed in the catalogue. The bore and the body dimensions are stated on the drawing for the nozzle you approve, and the sample settles them before a production run.
What is the minimum order?
1,000 sets, which is one full carton: 1,000 sets in an S3# 53 × 46 × 37.5 cm box at 11.10 kg net. The minimum is the carton, not a part carton.



