CH-002 Dispensing Bottle — 30 ml to 500 ml Squeeze Bottles with Cone Nozzle and Red Tip Plug

CH-002 is a 30-500 ml blank dispensing bottle series with a threaded neck, a white cone nozzle cap and a red tip plug. Seven sizes share one neck, so one filling line and one capping head handle the whole range. Bottles are supplied blank for OEM decoration.

SKU: CH-002 分类:

描述

CH-002 is a blank dispensing bottle range in seven sizes — 30, 60, 100, 120, 180, 250 and 500 ml — each fitted with a white cone nozzle cap and a red tip plug. The body is a straight-wall squeeze bottle with a threaded neck, made for low-to-medium viscosity liquids that are applied as a bead, a drop or a line: adhesives, sealants, oils, lubricants, inks and pigments. Bottles ship unprinted so you can decorate them for your own brand.

Seven white dispensing bottles from 30 ml to 500 ml with cone nozzle caps and red tip plugs

Quick answer

CH-002 is a 30–500 ml blank dispensing bottle series with a threaded neck, a white cone nozzle cap and a red tip plug. Seven sizes share one neck, so a single filling line and a single capping head handle the whole range. Bottles are supplied blank for OEM decoration.

Seven sizes on one neck

Dispensing bottle size chart: 30, 60, 100, 120, 180, 250 and 500 ml compared side by side

The seven sizes step up in even volume increments from a 30 ml sample bottle to a 500 ml workshop size, and every size takes the same nozzle cap. A packer can therefore run one filling line, one cap feeder and one spare-parts list across the whole range instead of stocking a cap family per size.

CH-002 sizes, weights and packing (per factory catalog)
Nominal volumeUnit net weight (g)MOQ (sets)Units per cartonCarton size (cm)Carton net weight (kg)
30 ml8.20100020002# 60*42*4916.40
60 ml12.00100010002# 60*42*4912.00
100 ml15.507007002# 60*42*4910.85
120 ml18.505605602# 60*42*4910.36
180 ml21.00297297S3# 53*46*37.56.24
250 ml23.00240240S3# 53*46*37.55.52
500 ml33.00108108S3# 53*46*37.53.56

Neck: threaded, shared across all seven sizes. Material: HDPE + PE (bottle and closure parts, per factory catalog). Nominal volume is the rated capacity; unit net weight per size is listed in the table above.

Cone nozzle cap with red tip plug

Dispensing bottle assembly: capped bottle, open-thread bottle, cone nozzle cap and red tip plug

Two parts close the bottle. The white cone nozzle screws onto the neck and tapers to a narrow opening, which is what turns a squeeze into a controlled bead instead of a flood. The red tip plug pushes into that opening and caps the point of use — it is the part the end user pulls out before dispensing, so it also works as a tamper indication on a retail pack.

Threaded bottle neck beside a detached white cone nozzle cap with its red tip plug

The neck carries a multi-start thread and a defined landing face so the nozzle seats square to the body and stays square after repeated capping. The nozzle skirt is ribbed for hand tightening and for a capping chuck to grip without crushing the cone.

Three white squeeze bottles with cone nozzle caps next to a fourth bottle lying on its side

Nozzle and plug are supplied as separate parts, so a packer can choose to ship assembled, bulk-packed separately, or assembled with the plug left loose in the carton.

Applications

These three images are concept renders built from our product photography. They show how the bottle is used, not a specific customer site.

An automatic filling nozzle dosing amber liquid into an open dispensing bottle on a stainless line

The open neck takes a standard filling nozzle without a special adapter, and the straight-wall body leaves room for a fill-level check on the line.

A squeeze bottle tilted over dark wood laying a continuous bead of adhesive beside two small metal parts

Squeeze pressure, not gravity, drives the flow: the body recovers its shape between strokes, so the bead stays even as the bottle empties.

  • Adhesives and sealants — bead or line application on joints and seams
  • Oils, greases and light lubricants — precision oiling of bearings, chains and tooling
  • Inks, pigments and dyes — small-batch and sample filling
  • Solvents, cleaners and conditioners — controlled wetting of a local area
  • Craft, model and repair kits — single-project retail packs

Seven dispensing bottles lined up on a workshop bench with spare nozzle caps and red tip plugs

Compatibility with a specific formulation must be confirmed by the buyer, because shelf life depends on the liquid, not only on the bottle. Test your own formulation in a sample bottle before a production run.

OEM, decoration and documentation

Bottles are supplied blank. Label, silk screen and sleeve decoration, plus cap colour matching to your brand, are available as OEM work. No logo, badge or certification mark is printed on the standard bottle.

Minimum order quantity per size is listed in the table above. Sampling and production lead time, decoration method, artwork requirements and colour minimums are quoted per project.

Certification and material documents: certification documents available upon request. No certification mark is claimed on the product itself, and no food-contact or pharmaceutical claim is made for these bottles.

Packing and shipping

Units per carton, carton size and carton net weight are listed in the table above. Bottles, nozzles and plugs can be packed separately or assembled, depending on how your line is set up. Inner liner and export packing method are confirmed at quotation. Mixed-size orders are quoted per project.

Other models in the dispensing range

Related blank bottle families from CHMIB: CH-001 instant adhesive bottle (5–100 ml, colour-coded cone cap, optional internal steel pin), CH-003 oil bottle (60–500 ml, tethered spout cap), CH-004 applicator bottle (30–500 ml, one-piece PP long-taper nozzle cap).

Request a sample or a quotation

Send your target size, the liquid you are packing, whether you need the nozzle assembled or bulk-packed, and your annual volume. We reply with a specification sheet, a sample plan and a quotation. Contact: info@chmib.com · WhatsApp: +86 139 2747 8593.

FAQ

What is the red tip for?

It is a plug that closes the nozzle opening. The end user pulls it out before dispensing, so on a retail pack it doubles as a tamper indication. It is not a screw cap, and it is not a needle.

Is this the same bottle as the instant adhesive range?

No. The instant adhesive range runs 5–100 ml with colour-coded cone caps and an optional internal steel needle. CH-002 is a larger 30–500 ml squeeze bottle with a wide cone nozzle and a red tip plug. They are different products for different liquids.

Can the bottles be filled on an automatic line?

The neck opens straight down into the body, so standard filling nozzles fit without an adapter. Whether your specific filler head fits is best checked with one sample bottle before a production run.

Do the bottles ship assembled?

Either way. Nozzle and plug are separate parts, so bottles can ship assembled, bulk-packed with caps loose, or assembled with plugs left in the carton.

Which liquids can I put in it?

Adhesives, sealants, oils, lubricants, inks, pigments and cleaners are the usual categories. Because the body is not a barrier layer, we do not recommend long-term storage of aggressive solvents. Compatibility and shelf life must be tested with your own formulation.