Description
CH-206 is a blank adhesive bottle: a red LDPE flat body with rounded corners, a neck with two coarse thread turns, a ribbed translucent tear band, and a long white tapered nozzle that steps out through a thin flange at its base. A conical white pull-off cap covers the nozzle between uses. The catalogue lists three volumes, 25, 50 and 250 ml, and closures in white or black. Bottles ship blank and unprinted.

Quick answer
CH-206 is a blank red LDPE adhesive bottle in 25, 50 and 250 ml, sealed with a ribbed tear band, a long white tapered nozzle and a conical pull-off cap; closures come in white or black. Catalogue minimums are full cartons: 600 sets of 25 ml, 500 of 50 ml and 150 of 250 ml. Only the 25 ml set carries measurements on the catalogue photograph; the other volumes are stated on the drawing for the volume you order.
The nozzle and the tear band
The neck carries two coarse thread turns; over them sits a ribbed translucent tear band, slightly pink-white, that bridges to the closure until the first opening. The long white tapered nozzle rises from a thin stepped flange at its base, and the conical pull-off cap — wider at the bottom, narrowing to a flat-topped short skirt — slips over it. The nozzle is the outlet: there is no steel needle in it.


Closure colours
The photographs show the same 25 ml bottle in glossy red with a white closure, and in matte black with a black closure. The body colour and the closure colour are matched on a project basis; the minimum quantity per colour is quoted per project.

The parts, separated
The set separates into the red bottle with its bare threaded neck, the tear band and white nozzle assembly, and the white conical pull-off cap. The pack can ship assembled and closed, or bulk-packed as body, nozzle and cap for your own filling and capping line.

Volumes and carton pack
Other volumes are quoted per project. Lead times, print minimums and mixed-volume shipments are quoted per project.
| Volume | Material | MOQ (sets) | Sets per carton | Carton | Carton net weight | Unit weight |
|---|---|---|---|---|---|---|
| 25 ml | LDPE bottle, PS pull-off cap, white nozzle | 600 | 600 | 3# 53 × 46 × 40 cm | 11.34 kg | 18.90 g |
| 50 ml | LDPE bottle, PS pull-off cap, white nozzle | 500 | 500 | 4# 60 × 42 × 45 cm | 11.45 kg | 22.90 g |
| 250 ml | LDPE bottle, PS pull-off cap, white nozzle | 150 | 150 | 4# 60 × 42 × 45 cm | 8.16 kg | 54.40 g |
Dimensions, as marked on our catalogue photograph
Only the 25 ml set carries measurements on our catalogue photograph: the body stands 70 mm tall, the total height to the top of the nozzle is 135 mm, the front width is 49.8 mm and the side thickness is 26 mm. Those are the figures marked on the photograph; the 50 and 250 ml volumes carry no printed dimensions here, and production tolerances come from the drawing, which we send for the volume you order.
Where CH-206 sits in the range
CH-206 is the flat-body adhesive bottle with a pull-off cap and a tapered nozzle, for anaerobic and thread-locking adhesives sold in small to medium packs. The instant adhesive bottles go down to 5 ml with steel needles, and the dispensing bottles cover larger liquid doses with cone nozzle caps and red plugs.
Applications
LDPE carries no barrier layer and the pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Solvent-based adhesives attack some resins: test the formulation in a filled sample before a production run, and check the pack against the rules of the market you sell into.
- Anaerobic and thread-locking adhesives, retaining and sealing compounds
- Contact adhesives, sealants and thin liquids dispensed through a tapered nozzle
- Workshop and maintenance packs in 25, 50 and 250 ml
- Sample and trade-size bottles where the flat body fits a toolbox pocket
OEM, decoration and documentation
Bottles ship blank and unprinted. A printed body, a labelled body, a coloured body or a different closure colour is an OEM item: label, silk screen and offset print are your artwork, and the bottle carries no logo or certification mark as supplied. Print minimums and per-colour minimums are quoted per project.
Certification documents are available upon request.
Request a sample or a quotation
Send the volume, the adhesive and its solvent, the body and closure colours, and your annual quantity. We reply with a drawing check, a sample plan and a quotation. Contact: info@chmib.com.
FAQ
Is the nozzle a steel needle?
No. It is the long white tapered nozzle moulded on the assembly, with a stepped flange at its base; there is no steel needle.
Which dimensions are published?
Only the 25 ml set, as marked on the catalogue photograph: body 70 mm tall, total height 135 mm, front width 49.8 mm, side thickness 26 mm. The 50 and 250 ml dimensions come from the drawing for the volume you order.
What are the minimums?
25 ml 600 sets, 50 ml 500 sets and 250 ml 150 sets, every minimum a full carton.
Which closure colours are available?
White or black closures are shown; body and closure colour are matched on a project basis, and the per-colour minimum is quoted per project.
Is CH-206 food or cosmetic grade?
No. The pack is not qualified as food-contact, cosmetic-grade or pharmaceutical primary packaging. Test the adhesive in a filled sample before a production run, and check it against the rules of the market you sell into.



